From eae9bb93fdd2e677c8882bcc96d42b804ac2bafe Mon Sep 17 00:00:00 2001 From: Ralph Amissah Date: Sun, 18 Nov 2012 21:50:04 -0500 Subject: v4: documentation; markup samples & help --- man/man1/sisu.1 | 3623 ++++++++++++++++++++----------------------------------- 1 file changed, 1276 insertions(+), 2347 deletions(-) (limited to 'man/man1/sisu.1') diff --git a/man/man1/sisu.1 b/man/man1/sisu.1 index 4f82611f..ccf359c0 100644 --- a/man/man1/sisu.1 +++ b/man/man1/sisu.1 @@ -1,30 +1,33 @@ -.TH "sisu" "1" "2012-11-05" "4.0.0" "SiSU" +.TH "sisu" "1" "2012-10-03" "4.0.0" "SiSU" .br .SH NAME .br sisu \- documents: markup, structuring, publishing in multiple standard formats, and search .br .SH SYNOPSIS +.br +sisu [\-short\-options|\-\-long\-options] [filename/wildcard] + .br sisu [\-abCcDdeFGghIikLMmNnoPpQqRrSsTtUuVvWwXxYyZ_0\-9] [filename/wildcard] .br -sisu [\-Ddcv] [instruction] [filename/wildcard] +sisu \-\-txt \-\-html \-\-epub \-\-odt \-\-pdf \-\-wordmap \-\-sqlite \-\-manpage \-\-texinfo \-\-sisupod \-\-source \-\-qrcode [filename/wildcard] .br -sisu [\-CcFLSVvW] +sisu [\-Ddcv] [instruction] [filename/wildcard] .br -sisu [operations] +sisu \-\-pg (\-\-createdb|update [filename/wildcard]|\-\-dropall) .br -sisu \-\-v3 [operations] +sisu [operations] .br -sisu \-\-v2 [operations] +sisu [\-CcFLSVvW] .br -sisu2 [operations] +sisu (\-\-configure|\-\-webrick|\-\-sample\-search\-form) .SH SISU \- MANUAL, RALPH AMISSAH .br @@ -32,7 +35,7 @@ RALPH AMISSAH .SH WHAT IS SISU? .br -.SH 1. INTRODUCTION \- WHAT IS SISU? +.SH INTRODUCTION \- WHAT IS SISU? .br .br @@ -47,11 +50,12 @@ text within a document. .br .B SiSU -is developed under an open source, software libre license (GPL3). Its use case -for development is work with medium to large document sets and cope with -evolving document formats/ representation technologies. Documents are prepared -once, and generated as need be to update the technical presentation or add -additional output formats. Various output formats (including search related +is developed under an open source, software libre license ( +.I GPLv3 +). Its use case for development is work with medium to large document sets and +cope with evolving document formats/ representation technologies. Documents are +prepared once, and generated as need be to update the technical presentation or +add additional output formats. Various output formats (including search related output) share a common mechanism for cross\-output\-format citation. .br @@ -66,12 +70,20 @@ The sisu engine works with an abstraction of the document's structure and content from which it is possible to generate different forms of representation of the document. Significantly .B SiSU -markup is more sparse than html and outputs which include html, EPUB, LaTeX, -landscape and portrait pdfs, Open Document Format (ODF), all of which can be -added to and updated. +markup is more sparse than html and outputs which include +.I HTML, +.I EPUB, +.I ODT +(Open Document Format text), +.I LaTeX, +landscape and portrait +.I PDF, +all of which can be added to and updated. .B SiSU -is also able to populate SQL type databases at an object level, which means -that searches can be made with that degree of granularity. +is also able to populate +.I SQL +type databases at an object level, which means that searches can be made with +that degree of granularity. .br Source document preparation and output generation is a two step process: (i) @@ -84,15 +96,24 @@ markup applied to a document, .B SiSU custom builds (to take advantage of the strengths of different ways of representing documents) various standard open output formats including plain -text, HTML, XHTML, XML, EPUB, OpenDocument, LaTeX or PDF files, and populate an -SQL database with objects[^1] (equating generally to paragraph\-sized chunks) -so searches may be performed and matches returned with that degree of -granularity ( e.g. your search criteria is met by these documents and at these -locations within each document). Document output formats share a common object -numbering system for locating content. This is particularly suitable for -"published" works (finalized texts as opposed to works that are frequently -changed or updated) for which it provides a fixed means of reference of -content. +text, +.I HTML, +.I XHTML, +.I XML, +.I EPUB, +.I ODT, +.I LaTeX +or +.I PDF +files, and populate an +.I SQL +database with objects[^1] (equating generally to paragraph\-sized chunks) so +searches may be performed and matches returned with that degree of granularity +( e.g. your search criteria is met by these documents and at these locations +within each document). Document output formats share a common object numbering +system for locating content. This is particularly suitable for "published" +works (finalized texts as opposed to works that are frequently changed or +updated) for which it provides a fixed means of reference of content. .br In preparing a @@ -131,7 +152,16 @@ proprietary software/equipment) in 15 years time, or the way the way in which html has evolved over its relatively short span of existence. .B SiSU provides the flexibility of producing documents in multiple non\-proprietary -open formats including html, pdf[^5] ODF,[^6] and EPUB.[^7] Whilst +open formats including +.I HTML, +.I EPUB, +[^5] +.I ODT, +[^6] +.I PDF +[^7] +.I ODF, +[^8]. Whilst .B SiSU relies on software, the markup is uncomplicated and minimalistic which guarantees that future engines can be written to run against it. It is also @@ -140,19 +170,29 @@ easily converted to other formats, which means documents prepared in can be migrated to other document formats. Further security is provided by the fact that the software itself, .B SiSU -is available under GPL3 a licence that guarantees that the source code will -always be open, and free as in libre, which means that that code base can be -used, updated and further developed as required under the terms of its license. -Another challenge is to keep up with a moving target. +is available under +.I GPLv3 +a licence that guarantees that the source code will always be open, and free as +in libre, which means that that code base can be used, updated and further +developed as required under the terms of its license. Another challenge is to +keep up with a moving target. .B SiSU permits new forms of output to be added as they become important, (Open Document Format text was added in 2006 when it became an ISO standard for -office applications and the archival of documents), EPUB was introduced in -2009; and allows the technical representations existing output to be updated -(html has evolved and the related module has been updated repeatedly over the -years, presumably when the World Wide Web Consortium (w3c) finalises html 5 -which is currently under development, the html module will again be updated -allowing all existing documents to be regenerated as html 5). +office applications and the archival of documents), +.I EPUB +was introduced in 2009; and allows the technical representations existing +output to be updated ( +.I HTML +has evolved and the related module has been updated repeatedly over the years, +presumably when the World Wide Web Consortium (w3c) finalises +.I HTML +5 which is currently under development, the +.I HTML +module will again be updated allowing all existing documents to be regenerated +as +.I HTML +5). .br The document formats are written to the file\-system and available for indexing @@ -185,29 +225,50 @@ content prepared in .br -.SH 2. COMMANDS SUMMARY +.SH COMMANDS SUMMARY .br -.SH 2.1 DESCRIPTION +.SH DESCRIPTION .br .B SiSU is a document publishing system, that from a simple single marked\-up document, -produces multiple output formats including: plaintext, html, xhtml, XML, epub, -odt (odf text), LaTeX, pdf, info, and SQL (PostgreSQL and SQLite), which share -text object numbers ("object citation numbering") and the same document -structure information. For more see: +produces multiple output formats including: +.I plaintext, +.I HTML, +.I XHTML, +.I XML, +.I EPUB, +.I ODT +( +.I OpenDocument +( +.I ODF +) text), +.I LaTeX, +.I PDF, +info, and +.I SQL +( +.I PostgreSQL +and +.I SQLite +) , which share text object numbers ("object citation numbering") and the same +document structure information. For more see: or + -.SH 2.2 DOCUMENT PROCESSING COMMAND FLAGS +.SH DOCUMENT PROCESSING COMMAND FLAGS .TP .B \-a [filename/wildcard] -produces plaintext with Unix linefeeds and without markup, (object numbers are -omitted), has footnotes at end of each paragraph that contains them [ \ \-A \ -for \ equivalent \ dos \ (linefeed) \ output \ file] [see \ \-e \ for \ -endnotes]. (Options include: \-\-endnotes for endnotes \-\-footnotes for -footnotes at the end of each paragraph \-\-unix for unix linefeed (default) -\-\-msdos for msdos linefeed) +produces +.I plaintext +with Unix linefeeds and without markup, (object numbers are omitted), has +footnotes at end of each paragraph that contains them [ \ \-A \ for \ +equivalent \ dos \ (linefeed) \ output \ file] [see \ \-e \ for \ endnotes]. +(Options include: \-\-endnotes for endnotes \-\-footnotes for footnotes at the +end of each paragraph \-\-unix for unix linefeed (default) \-\-msdos for msdos +linefeed) .TP .B \-b [filename/wildcard] @@ -290,23 +351,28 @@ produces an epub document, [sisu \ version \ >=2 \ ] (filename.epub). Alias \-e .TP .B \-\-exc\-* -exclude output feature, overrides configuration settings \-\-exc\-ocn, (exclude -object citation numbering, (switches off object citation numbering), affects -html (seg, scroll), epub, xhtml, xml, pdf); \-\-exc\-toc, (exclude table of -contents, affects html (scroll), epub, pdf); \-\-exc\-links\-to\-manifest, -\-\-exc\-manifest\-links, (exclude links to manifest, affects html (seg, -scroll)); \-\-exc\-search\-form, (exclude search form, affects html (seg, -scroll), manifest); \-\-exc\-minitoc, (exclude mini table of contents, affects -html (seg), concordance, manifest); \-\-exc\-manifest\-minitoc, (exclude mini -table of contents, affects manifest); \-\-exc\-html\-minitoc, (exclude mini -table of contents, affects html (seg), concordance); \-\-exc\-html\-navigation, -(exclude navigation, affects html (seg)); \-\-exc\-html\-navigation\-bar, -(exclude navigation bar, affects html (seg)); \-\-exc\-html\-search\-form, -(exclude search form, affects html (seg, scroll)); \-\-exc\-html\-right\-pane, -(exclude right pane/column, affects html (seg, scroll)); -\-\-exc\-html\-top\-band, (exclude top band, affects html (seg, scroll), -concordance (minitoc forced on to provide seg navigation)); \-\-exc\-segsubtoc -(exclude sub table of contents, affects html (seg), epub); see also \-\-inc\-* +exclude output feature, overrides configuration settings \-\-exc\- +.I ocn, +(exclude +.I object citation numbering, +(switches off +.I object citation numbering +) , affects html (seg, scroll), epub, xhtml, xml, pdf) ; \-\-exc\-toc, (exclude +table of contents, affects html (scroll), epub, pdf) ; +\-\-exc\-links\-to\-manifest, \-\-exc\-manifest\-links, (exclude links to +manifest, affects html (seg, scroll)); \-\-exc\-search\-form, (exclude search +form, affects html (seg, scroll), manifest); \-\-exc\-minitoc, (exclude mini +table of contents, affects html (seg), concordance, manifest); +\-\-exc\-manifest\-minitoc, (exclude mini table of contents, affects manifest); +\-\-exc\-html\-minitoc, (exclude mini table of contents, affects html (seg), +concordance); \-\-exc\-html\-navigation, (exclude navigation, affects html +(seg)); \-\-exc\-html\-navigation\-bar, (exclude navigation bar, affects html +(seg)); \-\-exc\-html\-search\-form, (exclude search form, affects html (seg, +scroll)); \-\-exc\-html\-right\-pane, (exclude right pane/column, affects html +(seg, scroll)); \-\-exc\-html\-top\-band, (exclude top band, affects html (seg, +scroll), concordance (minitoc forced on to provide seg navigation)); +\-\-exc\-segsubtoc (exclude sub table of contents, affects html (seg), epub) ; +see also \-\-inc\-* .TP .B \-F [\-\-webserv=webrick] @@ -460,17 +526,20 @@ see \-\-pdf .TP .B \-\-pdf [filename/wildcard] -produces LaTeX pdf (portrait.pdf & landscape.pdf). Default paper size is set in -config file, or document header, or provided with additional command line -parameter, e.g. \-\-papersize\-a4 preset sizes include: 'A4', U.S. 'letter' and -'legal' and book sizes 'A5' and 'B5' (system defaults to A4). Alias \-p +produces +.I LaTeX +pdf (portrait.pdf & landscape.pdf). Default paper size is set in config file, +or document header, or provided with additional command line parameter, e.g. +\-\-papersize\-a4 preset sizes include: 'A4', U.S. 'letter' and 'legal' and +book sizes 'A5' and 'B5' (system defaults to A4). Alias \-p .TP .B \-\-pg [instruction] [filename] -database postgresql ( \-\-pgsql may be used instead) possible instructions, -include: \-\-createdb; \-\-create; \-\-dropall; \-\-import [filename]; -\-\-update [filename]; \-\-remove [filename]; see database section below. Alias -\-D +database +.I PostgreSQL +( \-\-pgsql may be used instead) possible instructions, include: \-\-createdb; +\-\-create; \-\-dropall; \-\-import [filename]; \-\-update [filename]; +\-\-remove [filename]; see database section below. Alias \-D .TP .B \-\-po [language_directory/filename \ language_directory] @@ -538,11 +607,15 @@ see \-\-source .TP .B \-\-sample\-search\-form [\-\-webserv=webrick] -generate examples of (naive) cgi search form for sqlite and pgsql depends on -your already having used sisu to populate an sqlite and/or pgsql database, (the -sqlite version scans the output directories for existing sisu_sqlite databases, -so it is first necessary to create them, before generating the search form) see -\-d \-D and the database section below. If the optional parameter +generate examples of (naive) cgi search form for +.I SQLite +and PgSQL depends on your already having used sisu to populate an +.I SQLite +and/or PgSQL database, (the +.I SQLite +version scans the output directories for existing sisu_sqlite databases, so it +is first necessary to create them, before generating the search form) see \-d +\-D and the database section below. If the optional parameter \-\-webserv=webrick is passed, the cgi examples created will be set up to use the default port set for use by the webrick server, (otherwise the port is left blank and the system setting used, usually 80). The samples are dumped in the @@ -557,14 +630,19 @@ that you have your "keys" and ssh agent in place. Also see \-\-rsync. Alias \-r .TP .B \-\-sqlite \-\-[instruction] [filename] -database type set to sqlite, this produces one of two possible databases, -without additional database related instructions it produces a discreet sqlite +database type set to +.I SQLite, +this produces one of two possible databases, without additional database +related instructions it produces a discreet +.I SQLite file for the document processed; with additional instructions it produces a -common sqlite database of all processed documents that (come from the same -document preparation directory and as a result) share the same output directory -base path (possible instructions include: \-\-createdb; \-\-create; -\-\-dropall; \-\-import [filename]; \-\-update [filename]; \-\-remove -[filename]); see database section below. Alias \-d +common +.I SQLite +database of all processed documents that (come from the same document +preparation directory and as a result) share the same output directory base +path (possible instructions include: \-\-createdb; \-\-create; \-\-dropall; +\-\-import [filename]; \-\-update [filename]; \-\-remove [filename]); see +database section below. Alias \-d .TP .B \-\-sisupod @@ -612,12 +690,14 @@ produces texinfo and info file, (view with pinfo). Alias \-I .TP .B \-\-txt [filename/wildcard] -produces plaintext with Unix linefeeds and without markup, (object numbers are -omitted), has footnotes at end of each paragraph that contains them [ \ \-A \ -for \ equivalent \ dos \ (linefeed) \ output \ file] [see \ \-e \ for \ -endnotes]. (Options include: \-\-endnotes for endnotes \-\-footnotes for -footnotes at the end of each paragraph \-\-unix for unix linefeed (default) -\-\-msdos for msdos linefeed). Alias \-t +produces +.I plaintext +with Unix linefeeds and without markup, (object numbers are omitted), has +footnotes at end of each paragraph that contains them [ \ \-A \ for \ +equivalent \ dos \ (linefeed) \ output \ file] [see \ \-e \ for \ endnotes]. +(Options include: \-\-endnotes for endnotes \-\-footnotes for footnotes at the +end of each paragraph \-\-unix for unix linefeed (default) \-\-msdos for msdos +linefeed). Alias \-t .TP .B \-U [filename/wildcard] @@ -659,14 +739,13 @@ version information see \-\-verbose .TP -.B \-\-v2 [filename/wildcard] -invokes the sisu v2 document parser/generator. This is the default and is -normally omitted. +.B \-\-v3 [filename/wildcard] +invokes the sisu v3 document parser/generator. You may run sisu3 instead. .TP -.B \-\-v3 [filename/wildcard] -invokes the sisu v3 document parser/generator. Currently under development and -incomplete, v3 requires >= ruby1.9.2p180. You may run sisu3 instead. +.B \-\-v4 [filename/wildcard] +invokes the sisu v4 document parser/generator. This is the default and is +normally omitted. .TP .B \-\-verbose [filename/wildcard] @@ -684,7 +763,7 @@ see \-\-concordance .TP .B \-\-webrick -starts ruby's webrick webserver points at sisu output directories, the default +starts ruby' s webrick webserver points at sisu output directories, the default port is set to 8081 and can be changed in the resource configuration files. [tip: \ the \ webrick \ server \ requires \ link \ suffixes, \ so \ html \ output \ should \ be \ created \ using \ the \ \-h \ option \ rather \ than \ @@ -696,16 +775,21 @@ see \-\-concordance .TP .B \-\-xhtml [filename/wildcard] -produces xhtml/XML output for browser viewing (sax parsing). Alias \-b +produces xhtml/ +.I XML +output for browser viewing (sax parsing). Alias \-b .TP .B \-\-xml\-dom [filename/wildcard] -produces XML output with deep document structure, in the nature of dom. Alias -\-X +produces +.I XML +output with deep document structure, in the nature of dom. Alias \-X .TP .B \-\-xml\-sax [filename/wildcard] -produces XML output shallow structure (sax parsing). Alias \-x +produces +.I XML +output shallow structure (sax parsing). Alias \-x .TP .B \-X [filename/wildcard] @@ -738,14 +822,17 @@ to be processed, prior to processing. If \-Z is used as the lone processing related flag (or in conjunction with a combination of \-[mMvVq]), will remove the related document output directory. Alias \-Z -.SH 3. COMMAND LINE MODIFIERS +.SH COMMAND LINE MODIFIERS .br .TP -.B \-\-no\-ocn -[with \ \-\-html \ \-\-pdf \ or \ \-\-epub] switches off object citation -numbering. Produce output without identifying numbers in margins of html or -LaTeX/pdf output. +.B \-\-no\- +.I ocn +[with \ \-\-html \ \-\-pdf \ or \ \-\-epub] switches off +.I object citation numbering. +Produce output without identifying numbers in margins of html or +.I LaTeX +/pdf output. .TP .B \-\-no\-annotate @@ -760,51 +847,66 @@ strips output text of editor endnotes[^*2] denoted by asterisk sign .B \-\-no\-dagger strips output text of editor endnotes[^+1] denoted by dagger/plus sign -.SH 4. DATABASE COMMANDS +.SH DATABASE COMMANDS .br .br -dbi \- database interface +.B dbi \- database interface .br -\-D or \-\-pgsql set for postgresql \-d or \-\-sqlite default set for sqlite -\-d is modifiable with \-\-db=[database \ type \ (pgsql \ or \ sqlite)] +.B \-D or \-\-pgsql +set for +.I PostgreSQL +.B \-d or \-\-sqlite +default set for +.I SQLite +\-d is modifiable with \-\-db=[database \ type \ (PgSQL \ or \ .I \ SQLite \ ) +\ ] .TP .B \-\-pg \-v \-\-createall initial step, creates required relations (tables, indexes) in existing -postgresql database (a database should be created manually and given the same -name as working directory, as requested) (rb.dbi) [ \ \-dv \ \-\-createall \ -sqlite \ equivalent] it may be necessary to run sisu \-Dv \-\-createdb -initially NOTE: at the present time for postgresql it may be necessary to -manually create the database. The command would be 'createdb [database \ name]' -where database name would be SiSU_[present \ working \ directory \ name \ -(without \ path)]. Please use only alphanumerics and underscores. +.I PostgreSQL +database (a database should be created manually and given the same name as +working directory, as requested) (rb.dbi) [ \ \-dv \ \-\-createall \ .I \ +SQLite \ equivalent] it may be necessary to run sisu \-Dv \-\-createdb +initially NOTE: at the present time for +.I PostgreSQL +it may be necessary to manually create the database. The command would be +'createdb [database \ name]' where database name would be SiSU_[present \ +working \ directory \ name \ (without \ path)]. Please use only alphanumerics +and underscores. .TP .B \-\-pg \-v \-\-import -[filename/wildcard] imports data specified to postgresql db (rb.dbi) [ \ \-dv \ -\-\-import \ sqlite \ equivalent] +[filename/wildcard] imports data specified to +.I PostgreSQL +db (rb.dbi) [ \ \-dv \ \-\-import \ .I \ SQLite \ equivalent] .TP .B \-\-pg \-v \-\-update -[filename/wildcard] updates/imports specified data to postgresql db (rb.dbi) [ -\ \-dv \ \-\-update \ sqlite \ equivalent] +[filename/wildcard] updates/imports specified data to +.I PostgreSQL +db (rb.dbi) [ \ \-dv \ \-\-update \ .I \ SQLite \ equivalent] .TP .B \-\-pg \-\-remove -[filename/wildcard] removes specified data to postgresql db (rb.dbi) [ \ \-d \ -\-\-remove \ sqlite \ equivalent] +[filename/wildcard] removes specified data to +.I PostgreSQL +db (rb.dbi) [ \ \-d \ \-\-remove \ .I \ SQLite \ equivalent] .TP .B \-\-pg \-\-dropall -kills data" and drops (postgresql or sqlite) db, tables & indexes [ \ \-d \ -\-\-dropall \ sqlite \ equivalent] +kills data" and drops ( +.I PostgreSQL +or +.I SQLite +) db, tables & indexes [ \ \-d \ \-\-dropall \ .I \ SQLite \ equivalent] .br The \-v is for verbose output. -.SH 5. SHORTCUTS, SHORTHAND FOR MULTIPLE FLAGS +.SH SHORTCUTS, SHORTHAND FOR MULTIPLE FLAGS .br .TP @@ -852,7 +954,7 @@ add \-v for verbose mode and \-c to toggle color state, e.g. sisu \-2vc .br consider \-u for appended url info or \-v for verbose output -.SH 5.1 COMMAND LINE WITH FLAGS \- BATCH PROCESSING +.SH COMMAND LINE WITH FLAGS \- BATCH PROCESSING .br In the data directory run sisu \-mh filename or wildcard eg. "sisu \-h @@ -863,10 +965,10 @@ Running sisu (alone without any flags, filenames or wildcards) brings up the interactive help, as does any sisu command that is not recognised. Enter to escape. -.SH 6. HELP +.SH HELP .br -.SH 6.1 SISU MANUAL +.SH SISU MANUAL .br The most up to date information on sisu should be contained in the sisu_manual, @@ -892,7 +994,7 @@ move to the respective directory and type e.g.: .br sisu sisu_manual.ssm -.SH 6.2 SISU MAN PAGES +.SH SISU MAN PAGES .br If @@ -932,12 +1034,12 @@ Available man pages are converted back to html using man2html: An online version of the sisu man page is available here: .br -* various sisu man pages [^8] +* various sisu man pages [^9] .br -* sisu.1 [^9] +* sisu.1 [^10] -.SH 6.3 SISU BUILT\-IN INTERACTIVE HELP +.SH SISU BUILT\-IN INTERACTIVE HELP .br This is particularly useful for getting the current sisu setup/environment @@ -957,7 +1059,7 @@ information: .br sisu \-\-help env [for \ feedback \ on \ the \ way \ your \ system \ is \ - setup \ with \ regard \ to \ sisu] + setup \ with \ regard \ to \ sisu \ ] .br sisu \-V [environment \ information, \ same \ as \ above \ command] @@ -976,14 +1078,18 @@ NOTE: Running the command sisu (alone without any flags, filenames or wildcards) brings up the interactive help, as does any sisu command that is not recognised. Enter to escape. -.SH 7. INTRODUCTION TO SISU MARKUP[^10] +.SH INTRODUCTION TO SISU MARKUP[^11] .br -.SH 7.1 SUMMARY +.SH SUMMARY .br .B SiSU -source documents are plaintext (UTF\-8)[^11] files +source documents are +.I plaintext +( +.I UTF\-8 +)[^12] files .br All paragraphs are separated by an empty line. @@ -1042,9 +1148,9 @@ or if for a particular version: .br sisu \-\-query\-0.38 -.SH 7.2 MARKUP EXAMPLES +.SH MARKUP EXAMPLES -.SH 7.2.1 ONLINE +.SH ONLINE .br Online markup examples are available together with the respective outputs @@ -1060,16 +1166,16 @@ markup and the respective output produced: an alternative presentation of markup syntax: /usr/share/doc/sisu/on_markup.txt.gz -.SH 7.2.2 INSTALLED +.SH INSTALLED .br With .B SiSU installed sample skins may be found in: /usr/share/doc/sisu/markup\-samples (or -equivalent directory) and if sisu\-markup\-samples is installed also under: +equivalent directory) and if sisu \-markup\-samples is installed also under: /usr/share/doc/sisu/markup\-samples\-non\-free -.SH 8. MARKUP OF HEADERS +.SH MARKUP OF HEADERS .br .br @@ -1086,7 +1192,7 @@ a space and the comment: % this would be a comment .fi -.SH 8.1 SAMPLE HEADER +.SH SAMPLE HEADER .br This current document is loaded by a master document that has a header similar @@ -1095,57 +1201,60 @@ to this one: .nf % SiSU master 2.0 @title: SiSU - :subtitle: Manual +:subtitle: Manual @creator: - :author: Amissah, Ralph -@publisher: \ [publisher \ name] -@rights: Copyright (C) Ralph Amissah 2007, License GPL 3 +:author: Amissah, Ralph +@publisher: [publisher \ name] +@rights: Copyright (C) Ralph Amissah 2007, part of SiSU documentation, License GPL 3 @classify: - :type: information - :topic_register: SiSU:manual;electronic documents:SiSU:manual - :subject: ebook, epublishing, electronic book, electronic publishing, +:type: information +:topic_register: SiSU:manual;electronic documents:SiSU:manual +:subject: ebook, epublishing, electronic book, electronic publishing, electronic document, electronic citation, data structure, citation systems, search % used_by: manual @date: - :published: 2008\-05\-22 - :created: 2002\-08\-28 - :issued: 2002\-08\-28 - :available: 2002\-08\-28 - :modified: 2010\-03\-03 +:published: 2008\-05\-22 +:created: 2002\-08\-28 +:issued: 2002\-08\-28 +:available: 2002\-08\-28 +:modified: 2010\-03\-03 @make: - :num_top: 1 - :breaks: new=C; break=1 - :skin: skin_sisu_manual - :bold: /Gnu|Debian|Ruby|SiSU/ - :manpage: name=sisu \- documents: markup, structuring, publishing - in multiple standard formats, and search; - synopsis=sisu \ [\-abcDdeFhIiMmNnopqRrSsTtUuVvwXxYyZz0\-9] \ [filename/wildcard \ ] - . sisu \ [\-Ddcv] \ [instruction] - . sisu \ [\-CcFLSVvW] - . sisu \-\-v2 \ [operations] - . sisu \-\-v3 \ [operations] +:num_top: 1 +:breaks: new=C; break=1 +:bold: /Gnu|Debian|Ruby|SiSU/ +:home_button_text: {SiSU}http://sisudoc.org; {git}http://git.sisudoc.org +:footer: {SiSU}http://sisudoc.org; {git}http://git.sisudoc.org +:manpage: name=sisu \- documents: markup, structuring, publishing in multiple standard formats, and search; + synopsis=sisu [\-abcDdeFhIiMmNnopqRrSsTtUuVvwXxYyZz0\-9] [filename/wildcard \ ] + . sisu [\-Ddcv] [instruction] + . sisu [\-CcFLSVvW] + . sisu \-\-v4 [operations] + . sisu \-\-v3 [operations] @links: - { SiSU Homepage }http://www.sisudoc.org/ - { SiSU Manual }http://www.sisudoc.org/sisu/sisu_manual/ - { Book Samples & Markup Examples }http://www.jus.uio.no/sisu/SiSU/examples.html - { SiSU Download }http://www.jus.uio.no/sisu/SiSU/download.html - { SiSU Changelog }http://www.jus.uio.no/sisu/SiSU/changelog.html - { SiSU Git repo }http://git.sisudoc.org/?p=code/sisu.git;a=summary - { SiSU List Archives }http://lists.sisudoc.org/pipermail/sisu/ - { SiSU @ Debian }http://packages.qa.debian.org/s/sisu.html - { SiSU Project @ Debian }http://qa.debian.org/developer.php?login=sisu@lists.sisudoc.org - { SiSU @ Wikipedia }http://en.wikipedia.org/wiki/SiSU +{ SiSU Homepage }http://www.sisudoc.org/ +{ SiSU Manual }http://www.sisudoc.org/sisu/sisu_manual/ +{ Book Samples & Markup Examples }http://www.jus.uio.no/sisu/SiSU/examples.html +{ SiSU Download }http://www.jus.uio.no/sisu/SiSU/download.html +{ SiSU Changelog }http://www.jus.uio.no/sisu/SiSU/changelog.html +{ SiSU Git repo }http://git.sisudoc.org/?p=code/sisu.git;a=summary +{ SiSU List Archives }http://lists.sisudoc.org/pipermail/sisu/ +{ SiSU @ Debian }http://packages.qa.debian.org/s/sisu.html +{ SiSU Project @ Debian }http://qa.debian.org/developer.php?login=sisu@lists.sisudoc.org +{ SiSU @ Wikipedia }http://en.wikipedia.org/wiki/SiSU .fi -.SH 8.2 AVAILABLE HEADERS +.SH AVAILABLE HEADERS .br Header tags appear at the beginning of a document and provide meta information -on the document (such as the Dublin Core), or information as to how the -document as a whole is to be processed. All header instructions take the form -@headername: or on the next line and indented by once space :subheadername: All -Dublin Core meta tags are available +on the document (such as the +.I Dublin Core +) , or information as to how the document as a whole is to be processed. All +header instructions take the form @headername: or on the next line and indented +by once space :subheadername: All +.I Dublin Core +meta tags are available .br .B @indentifier: @@ -1164,56 +1273,60 @@ structure, and can be useful to know. This is a sample header .nf -% SiSU 2.0 \ [declared \ file\-type \ identifier \ with \ markup \ version] +% SiSU 2.0 [declared \ file\-type \ identifier \ with \ markup \ version] .fi .nf -@title: \ [title \ text] \ [this \ header \ is \ the \ only \ one \ that \ is \ mandatory] - :subtitle: \ [subtitle \ if \ any] +@title: [title \ text] [this \ header \ is \ the \ only \ one \ that \ is \ mandatory] + :subtitle: [subtitle \ if \ any] :language: English .fi .nf @creator: - :author: \ [Lastname, \ First \ names] - :illustrator: \ [Lastname, \ First \ names] - :translator: \ [Lastname, \ First \ names] - :prepared_by: \ [Lastname, \ First \ names] +:author: [Lastname, \ First \ names] +:illustrator: [Lastname, \ First \ names] +:translator: [Lastname, \ First \ names] +:prepared_by: [Lastname, \ First \ names] .fi .nf @date: - :published: \ [year \ or \ yyyy\-mm\-dd] - :created: \ [year \ or \ yyyy\-mm\-dd] - :issued: \ [year \ or \ yyyy\-mm\-dd] - :available: \ [year \ or \ yyyy\-mm\-dd] - :modified: \ [year \ or \ yyyy\-mm\-dd] - :valid: \ [year \ or \ yyyy\-mm\-dd] - :added_to_site: \ [year \ or \ yyyy\-mm\-dd] - :translated: \ [year \ or \ yyyy\-mm\-dd] +:published: [year \ or \ yyyy\-mm\-dd] +:created: [year \ or \ yyyy\-mm\-dd] +:issued: [year \ or \ yyyy\-mm\-dd] +:available: [year \ or \ yyyy\-mm\-dd] +:modified: [year \ or \ yyyy\-mm\-dd] +:valid: [year \ or \ yyyy\-mm\-dd] +:added_to_site: [year \ or \ yyyy\-mm\-dd] +:translated: [year \ or \ yyyy\-mm\-dd] .fi .nf @rights: - :copyright: Copyright (C) \ [Year \ and \ Holder] - :license: \ [Use \ License \ granted] - :text: \ [Year \ and \ Holder] - :translation: \ [Name, \ Year] - :illustrations: \ [Name, \ Year] +:copyright: Copyright (C) [Year \ and \ Holder] +:license: [Use \ License \ granted] +:text: [Year \ and \ Holder] +:translation: [Name, \ Year] +:illustrations: [Name, \ Year] .fi .nf @classify: - :topic_register: SiSU:markup sample:book;book:novel:fantasy - :type: - :subject: - :description: - :keywords: - :abstract: - :isbn: \ [ISBN] - :loc: \ [Library \ of \ Congress \ classification] - :dewey: \ [Dewey \ classification] - :pg: \ [Project \ Gutenberg \ text \ number] +:topic_register: SiSU:markup sample:book;book:novel:fantasy +:type: +:subject: +:description: +:keywords: +:abstract: +:loc: [Library \ of \ Congress \ classification] +:dewey: Dewey classification +.fi + +.nf +@identify: +:isbn: [ISBN] +:oclc: .fi .nf @@ -1223,33 +1336,28 @@ This is a sample header .nf @make: - :skin: skin_name - [skins change default settings related to the appearance of documents generated] - :num_top: 1 - :headings: \ [text \ to \ match \ for \ each \ level - (e.g. PART; Chapter; Section; Article; - or another: none; BOOK|FIRST|SECOND; none; CHAPTER;) - :breaks: new=:C; break=1 - :promo: sisu, ruby, sisu_search_libre, open_society - :bold: [regular expression of words/phrases to be made bold] - :italics: \ [regular \ expression \ of \ words/phrases \ to \ italicise] +:num_top: 1 +:headings: [text \ to \ match \ for \ each \ level \ (e.g. \ PART; \ Chapter; \ Section; \ Article; \ or \ another: \ none; \ BOOK|FIRST|SECOND; \ none; \ CHAPTER;) \ :breaks: \ new=:C; \ break=1 \ :promo: \ sisu, \ ruby, \ sisu_search_libre, \ open_society \ :bold: \ [regular \ expression \ of \ words/phrases \ to \ be \ made \ bold] +:italics: [regular \ expression \ of \ words/phrases \ to \ italicise] +:home_button_text: {SiSU}http://sisudoc.org; {git}http://git.sisudoc.org +:footer: {SiSU}http://sisudoc.org; {git}http://git.sisudoc.org .fi .nf @original: - :language: \ [language] +:language: [language] .fi .nf @notes: - :comment: - :prefix: \ [prefix \ is \ placed \ just \ after \ table \ of \ contents] +:comment: +:prefix: [prefix \ is \ placed \ just \ after \ table \ of \ contents] .fi -.SH 9. MARKUP OF SUBSTANTIVE TEXT +.SH MARKUP OF SUBSTANTIVE TEXT .br -.SH 9.1 HEADING LEVELS +.SH HEADING LEVELS .br Heading levels are :A~ ,:B~ ,:C~ ,1~ ,2~ ,3~ \... :A \- :C being part / section @@ -1282,7 +1390,7 @@ otherwise takes the form 1~my_filename_for_this_segment .br .B 2~ [heading \ text] -Second level heading preceding substantive text of document or sub\-heading 3, +Second level heading preceding substantive text of document or sub\-heading 3 , the heading level that would normally be marked 1.1 or 1.2 or 1.3 or 2.1 etc. in a document. @@ -1293,12 +1401,10 @@ be marked 1.1.1 or 1.1.2 or 1.2.1 or 2.1.1 etc. in a document .nf 1~filename level 1 heading, -% the primary division such as Chapter that is followed by substantive text, -% and may be further subdivided (this is the level on which by default html -% segments are made) +% the primary division such as Chapter that is followed by substantive text, and may be further subdivided (this is the level on which by default html segments are made) .fi -.SH 9.2 FONT ATTRIBUTES +.SH FONT ATTRIBUTES .br .B markup example: @@ -1307,25 +1413,15 @@ be marked 1.1.1 or 1.1.2 or 1.2.1 or 2.1.1 etc. in a document normal text, *{emphasis}*, !{bold text}!, /{italics}/, _{underscore}_, "{citation}", ^{superscript}^, ,{subscript},, +{inserted text}+, \-{strikethrough}\-, #{monospace}# normal text -.br -*{emphasis}* \ [note: \ can \ be \ configured \ to \ be \ represented \ by \ bold, \ italics \ or \ underscore] -.br +*{emphasis}* [note: \ can \ be \ configured \ to \ be \ represented \ by \ bold, \ italics \ or \ underscore] !{bold text}! -.br -_{underscore}_ -.br /{italics}/ -.br +_{underscore}_ "{citation}" -.br ^{superscript}^ -.br ,{subscript}, -.br +{inserted text}+ -.br \-{strikethrough}\- -.br #{monospace}# .fi @@ -1335,7 +1431,8 @@ _{underscore}_ .br normal text, .B emphasis, -.B bold text, +.B bold text +, .I italics, .I underscore, "citation", ^superscript^, [subscript], ++inserted text++, @@ -1376,18 +1473,15 @@ or \ underscore] .br monospace -.SH 9.3 INDENTATION AND BULLETS +.SH INDENTATION AND BULLETS .br .B markup example: .nf ordinary paragraph -.br _1 indent paragraph one step -.br _2 indent paragraph two steps -.br _9 indent paragraph nine steps .fi @@ -1411,9 +1505,7 @@ ordinary paragraph .nf _* bullet text -.br _1* bullet text, first indent -.br _2* bullet text, two step indent .fi @@ -1437,11 +1529,10 @@ Numbered List (not to be confused with headings/titles, (document structure)) .nf # numbered list numbered list 1., 2., 3, etc. -.br _# numbered list numbered list indented a., b., c., d., etc. .fi -.SH 9.4 HANGING INDENTS +.SH HANGING INDENTS .br .B markup example: @@ -1466,7 +1557,7 @@ first line indented, rest of paragraph no indent .br in each case level may be 0\-9 -.SH 9.5 FOOTNOTES / ENDNOTES +.SH FOOTNOTES / ENDNOTES .br Footnotes and endnotes are marked up at the location where they would be @@ -1484,7 +1575,7 @@ determines whether footnotes or endnotes will be produced .B resulting output: .br -[^12] +[^13] .br .B markup example: @@ -1497,14 +1588,13 @@ normal text~{ self contained endnote marker & endnote in one }~ continues .B resulting output: .br -normal text[^13] continues +normal text[^14] continues .br .B markup example: .nf normal text ~{* unnumbered asterisk footnote/endnote, insert multiple asterisks if required }~ continues -.br normal text ~{** another unnumbered asterisk footnote/endnote }~ continues .fi @@ -1522,7 +1612,6 @@ normal text [^**] continues .nf normal text ~[* \ editors \ notes, \ numbered \ asterisk \ footnote/endnote \ series \ ]~ continues -.br normal text ~[+ \ editors \ notes, \ numbered \ asterisk \ footnote/endnote \ series \ ]~ continues .fi @@ -1541,16 +1630,15 @@ normal text [^+2] continues .nf % note the endnote marker "~^" normal text~^ continues -.br ^~ endnote text following the paragraph in which the marker occurs .fi .br the standard and pair notation cannot be mixed in the same document -.SH 9.6 LINKS +.SH LINKS -.SH 9.6.1 NAKED URLS WITHIN TEXT, DEALING WITH URLS +.SH NAKED URLS WITHIN TEXT, DEALING WITH URLS .br urls found within text are marked up automatically. A url within text is @@ -1601,11 +1689,10 @@ blocks are discussed later in this document .nf deb http://www.jus.uio.no/sisu/archive unstable main non\-free -.br deb\-src http://www.jus.uio.no/sisu/archive unstable main non\-free .fi -.SH 9.6.2 LINKING TEXT +.SH LINKING TEXT .br To link text or an image to a url the markup is as follows @@ -1638,27 +1725,45 @@ about {~^ SiSU }http://url.org markup .B resulting output: .br -about SiSU [^14] markup +aboutSiSU [^15] markup .br -Internal document links to a tagged location, including an ocn +Internal document links to a tagged location, including an +.I ocn .br .B markup example: .nf - { tux.png 64x80 }image -.br - % various url linked images +about { text links }#link_text +.fi + .br - {tux.png 64x80 "a better way" }http://www.sisudoc.org/ +.B resulting output: + .br +about ⌠text links⌡⌈link_text⌋ + .br - {GnuDebianLinuxRubyBetterWay.png 100x101 "Way Better \- with Gnu/Linux, Debian and Ruby" }http://www.sisudoc.org/ +Shared document collection link + .br +.B markup example: + +.nf +about { SiSU book markup examples }:SiSU/examples.html +.fi + .br - {~^ ruby_logo.png "Ruby" }http://www.ruby\-lang.org/en/ +.B resulting output: + .br +about ⌠ +.B SiSU +book markup examples⌡⌈:SiSU/examples.html⌋ + +.SH LINKING IMAGES + .br .B markup example: @@ -1684,16 +1789,15 @@ GnuDebianLinuxRubyBetterWay.png 100x101 "Way Better \- with Gnu/Linux, Debian and Ruby" .br -[ \ ruby_logo \ (png \ missing) \ ] [^15] +ruby_logo.png 70x90 "Ruby" [^16] .br .B linked url footnote shortcut .nf -{~^ \ [text \ to \ link] }http://url.org -% maps to: { \ [text \ to \ link] }http://url.org ~{ http://url.org }~ -% which produces hyper\-linked text within a document/paragraph, -% with an endnote providing the url for the text location used in the hyperlink +{~^ [text \ to \ link] }http://url.org +% maps to: { [text \ to \ link] }http://url.org ~{ http://url.org }~ +% which produces hyper\-linked text within a document/paragraph, with an endnote providing the url for the text location used in the hyperlink .fi .nf @@ -1705,9 +1809,41 @@ note at a heading level the same is automatically achieved by providing names to headings 1, 2 and 3 i.e. 2~[name] and 3~[name] or in the case of auto\-heading numbering, without further intervention. -.SH 9.7 GROUPED TEXT +.SH LINK SHORTCUT FOR MULTIPLE VERSIONS OF A SISU DOCUMENT IN THE SAME DIRECTORY +TREE -.SH 9.7.1 TABLES +.br +.B markup example: + +.nf +!_ /{"Viral Spiral"}/, David Bollier +{ "Viral Spiral", David Bollier [3sS]}viral_spiral.david_bollier.sst +.fi + +.br +.B +.I "Viral Spiral", +David Bollier + +"Viral Spiral", David Bollier + document manifest + ⌠html, segmented text⌡「http://corundum/sisu_manual/en/html/viral_spiral.david_bollier.html」 + ⌠html, scroll, document in one⌡「http://corundum/sisu_manual/en/html/viral_spiral.david_bollier.html」 + ⌠epub⌡「http://corundum/sisu_manual/en/epub/viral_spiral.david_bollier.epub」 + ⌠pdf, landscape⌡「http://corundum/sisu_manual/en/pdf/viral_spiral.david_bollier.pdf」 + ⌠pdf, portrait⌡「http://corundum/sisu_manual/en/pdf/viral_spiral.david_bollier.pdf」 + ⌠odf: odt, open document text⌡「http://corundum/sisu_manual/en/odt/viral_spiral.david_bollier.odt」 + ⌠xhtml scroll⌡「http://corundum/sisu_manual/en/xhtml/viral_spiral.david_bollier.xhtml」 + ⌠xml, sax⌡「http://corundum/sisu_manual/en/xml/viral_spiral.david_bollier.xml」 + ⌠xml, dom⌡「http://corundum/sisu_manual/en/xml/viral_spiral.david_bollier.xml」 + ⌠concordance⌡「http://corundum/sisu_manual/en/html/viral_spiral.david_bollier.html」 + ⌠dcc, document content certificate (digests)⌡「http://corundum/sisu_manual/en/digest/viral_spiral.david_bollier.txt」 + ⌠markup source text⌡「http://corundum/sisu_manual/en/src/viral_spiral.david_bollier.sst」 + ⌠markup source (zipped) pod⌡「http://corundum/sisu_manual/en/pod/viral_spiral.david_bollier.sst.zip」 + +.SH GROUPED TEXT + +.SH TABLES .br Tables may be prepared in two either of two forms @@ -1729,7 +1865,7 @@ column three of row two, and so on .br .B resulting output: - [table omitted, see other document formats] +This is a table|this would become column two of row one|column three of row one is here』And here begins another row|column two of row two|column three of row two, and so on』 .br a second form may be easier to work with in cases where there is not much @@ -1737,7 +1873,7 @@ information in each column .br .B markup example: -[^17] +[^18] .nf !_ Table 3.1: Contributors to Wikipedia, January 2001 \- June 2005 @@ -1757,13 +1893,13 @@ No. of articles, all languages | 25| 19,000| 138,000| 490,000| 862,0 .br .B Table 3.1: Contributors to Wikipedia, January 2001 \- June 2005 - [table omitted, see other document formats] +|Jan. 2001|Jan. 2002|Jan. 2003|Jan. 2004|July 2004|June 2006』Contributors*|10|472|2,188|9,653|25,011|48,721』Active contributors**|9|212|846|3,228|8,442|16,945』Very active contributors***|0|31|190|692|1,639|3,016』No. of English language articles|25|16,000|101,000|190,000|320,000|630,000』No. of articles, all languages|25|19,000|138,000|490,000|862,000|1,600,000』 .br * Contributed at least ten times; ** at least 5 times in last month; *** more than 100 times in last month. -.SH 9.7.2 POEM +.SH POEM .br .B basic markup: @@ -1831,106 +1967,59 @@ poem{ .B resulting output: `Fury said to a -.br mouse, That he -.br met in the -.br house, -.br "Let us -.br both go to -.br law: I will -.br prosecute -.br YOU. \-\-Come, -.br I'll take no -.br denial; We -.br must have a -.br trial: For -.br really this -.br morning I've -.br nothing -.br to do." -.br Said the -.br mouse to the -.br cur, "Such -.br a trial, -.br dear Sir, -.br With -.br no jury -.br or judge, -.br would be -.br wasting -.br our -.br breath." -.br "I'll be -.br judge, I'll -.br be jury," -.br Said -.br cunning -.br old Fury: -.br "I'll -.br try the -.br whole -.br cause, -.br and -.br condemn -.br you -.br to -.br death."' -.br -.SH 9.7.3 GROUP +.SH GROUP .br .B basic markup: .nf group{ -.br Your grouped text here -.br }group -.br A group is treated as an object and given a single object number. .fi @@ -1939,7 +2028,7 @@ A group is treated as an object and given a single object number. .nf group{ - 'Fury said to a + `Fury said to a mouse, That he met in the house, @@ -1990,95 +2079,51 @@ group{ .B resulting output: `Fury said to a -.br mouse, That he -.br met in the -.br house, -.br "Let us -.br both go to -.br law: I will -.br prosecute -.br YOU. \-\-Come, -.br I'll take no -.br denial; We -.br must have a -.br trial: For -.br really this -.br morning I've -.br nothing -.br to do." -.br Said the -.br mouse to the -.br cur, "Such -.br a trial, -.br dear Sir, -.br With -.br no jury -.br or judge, -.br would be -.br wasting -.br our -.br breath." -.br "I'll be -.br judge, I'll -.br be jury," -.br Said -.br cunning -.br old Fury: -.br "I'll -.br try the -.br whole -.br cause, -.br and -.br condemn -.br you -.br to -.br death."' -.br -.SH 9.7.4 CODE +.SH CODE .br Code tags code{ \... }code (used as with other group tags described above) are @@ -2196,9 +2241,9 @@ code{# as demonstrated here: 44 | death."' .fi -.SH 9.8 ADDITIONAL BREAKS \- LINEBREAKS WITHIN OBJECTS, COLUMN AND PAGE\-BREAKS +.SH ADDITIONAL BREAKS \- LINEBREAKS WITHIN OBJECTS, COLUMN AND PAGE\-BREAKS -.SH 9.8.1 LINE\-BREAKS +.SH LINE\-BREAKS .br To break a line within a "paragraph object", two backslashes \e\e @@ -2217,14 +2262,23 @@ The html break br enclosed in angle brackets (though undocumented) is available in versions prior to 3.0.13 and 2.9.7 (it remains available for the time being, but is depreciated). -.SH 9.8.2 PAGE BREAKS +.SH PAGE BREAKS .br Page breaks are only relevant and honored in some output formats. A page break or a new page may be inserted manually using the following markup on a line on its own: +.br +page new =\e= or breaks the page, starts a new page. + +.br +page break \-\\- or breaks a column, starts a new column, if using columns, +else breaks the page, starts a new page. + .nf +\-\e\e\- +or <:pb> .fi @@ -2232,17 +2286,12 @@ its own: or .nf +=\e\e= +or <:pn> .fi -.br -page new <:pn> breaks the page, starts a new page. - -.br -page break <:pb> breaks a column, starts a new column, if using columns, else -breaks the page, starts a new page. - -.SH 9.9 BOOK INDEX +.SH BOOK INDEX .br To make an index append to paragraph the book index term relates to it, using @@ -2307,7 +2356,7 @@ additional paragraph. The logical structure of the resulting index would be: second sub\-term, 1, .fi -.SH 10. COMPOSITE DOCUMENTS MARKUP +.SH COMPOSITE DOCUMENTS MARKUP .br .br @@ -2338,901 +2387,457 @@ basic markup for importing a document into a master document .fi .br -The form described above should be relied on. Within the Vim editor it results -in the text thus linked becoming hyperlinked to the document it is calling in -which is convenient for editing. Alternative markup for importation of -documents under consideration, and occasionally supported have been. +The form described above should be relied on. Within the +.I Vim +editor it results in the text thus linked becoming hyperlinked to the document +it is calling in which is convenient for editing. -.nf -<< filename.ssi -<<{filename.ssi} -% using textlink alternatives -<< |filename.ssi|@|^| -.fi - -.SH 11. MARKUP SYNTAX HISTORY +.SH SISU FILETYPES .br -.SH 11.1 NOTES RELATED TO FILES\-TYPES AND MARKUP SYNTAX .br +.B SiSU +has +.I plaintext +and binary filetypes, and can process either type of document. -2.0 introduced new headers and is therefore incompatible with 1.0 though -otherwise the same with the addition of a couple of tags (i.e. a superset) - -.br -0.38 is substantially current for version 1.0 +.SH .SST \.SSM \.SSI MARKED UP PLAIN TEXT -.br -depreciated 0.16 supported, though file names were changed at 0.37 +.TP +.B SiSU¤b〕 documents are prepared as plain\-text (utf\-8) files with +.B SiSU +markup. They may make reference to and contain images (for example), which are +stored in the directory beneath them _sisu/image. 〔b¤SiSU +.I plaintext +markup files are of three types that may be distinguished by the file extension +used: regular text \.sst; master documents, composite documents that +incorporate other text, which can be any regular text or text insert; and +inserts the contents of which are like regular text except these are marked + \.ssi and are not processed. .br -* sisu \-\-query=[sisu \ version \ [0.38] or 'history] +.B SiSU +processing can be done directly against a sisu documents; which may be located +locally or on a remote server for which a url is provided. .br -provides a short history of changes to .B SiSU -markup +source markup can be shared with the command: .br -.B SiSU 2.0 -(2010\-03\-06:09/6) same as 1.0, apart from the changing of headers and the -addition of a monospace tag related headers now grouped, e.g. + sisu \-s [filename] -.nf -@title: - :subtitle: +.SH SISU TEXT \- REGULAR FILES (.SST) -@creator: - :author: - :translator: - :illustrator: +.br +The most common form of document in +.B SiSU, +see the section on +.B SiSU +markup. -@rights: - :text: - :illustrations: -.fi +.SH SISU MASTER FILES (.SSM) .br -see document markup samples, and sisu \-\-help headers +Composite documents which incorporate other +.B SiSU +documents which may be either regular +.B SiSU +text \.sst which may be generated independently, or inserts prepared solely for +the purpose of being incorporated into one or more master documents. .br -the monospace tag takes the form of a hash '#' - -.nf -#{ this enclosed text would be monospaced }# -.fi +The mechanism by which master files incorporate other documents is described as +one of the headings under under +.B SiSU +markup in the +.B SiSU +manual. .br -.B 1.0 -(2009\-12\-19:50/6) same as 0.69 +Note: Master documents may be prepared in a similar way to regular documents, +and processing will occur normally if a \.sst file is renamed \.ssm without +requiring any other documents; the \.ssm marker flags that the document may +contain other documents. .br -.B 0.69 -(2008\-09\-16:37/2) (same as 1.0) and as previous (0.57) with the addition of -book index tags +Note: a secondary file of the composite document is built prior to processing +with the same prefix and the suffix \._sst [^19] -.nf -/^={.+?}$/ -.fi +.SH SISU INSERT FILES (.SSI) .br -e.g. appended to a paragraph, on a new\-line (without a blank line in between) -logical structure produced assuming this is the first text "object" - -.nf -={GNU/Linux community distribution:Debian+2|Fedora|Gentoo;Free Software Foundation+5} -.fi +Inserts are documents prepared solely for the purpose of being incorporated +into one or more master documents. They resemble regular +.B SiSU +text files except they are ignored by the +.B SiSU +processor. Making a file a \.ssi file is a quick and convenient way of flagging +that it is not intended that the file should be processed on its own. -.nf -Free Software Foundation, 1\-6 -GNU/Linux community distribution, 1 - Debian, 1\-3 - Fedora, 1 - Gentoo, -.fi +.SH SISUPOD, ZIPPED BINARY CONTAINER (SISUPOD.ZIP, \.SSP) .br -.B 0.66 -(2008\-02\-24:07/7) same as previous, adds semantic tags, [experimental \ and \ -not\-used] +A sisupod is a zipped +.B SiSU +text file or set of +.B SiSU +text files and any associated images that they contain (this will be extended +to include sound and multimedia\-files) -.nf -/[:;]{.+?}[:;][a\-z+]/ -.fi +.TP +.B SiSU +.I plaintext +files rely on a recognised directory structure to find contents such as images +associated with documents, but all images for example for all documents +contained in a directory are located in the sub\-directory _sisu/image. Without +the ability to create a sisupod it can be inconvenient to manually identify all +other files associated with a document. A sisupod automatically bundles all +associated files with the document that is turned into a pod. .br -.B 0.57 -(2007w34/4) +The structure of the sisupod is such that it may for example contain a single +document and its associated images; a master document and its associated +documents and anything else; or the zipped contents of a whole directory of +prepared .B SiSU -0.57 is the same as 0.42 with the introduction of some a shortcut to use the -headers @title and @creator in the first heading [expanded \ using \ the \ -contents \ of \ the \ headers \ @title: \ and \ @author:] - -.nf -:A~ @title by @author -.fi +documents. .br -.B 0.52 -(2007w14/6) declared document type identifier at start of text/document: - -.br - .B SiSU -0.52 - -.br -or, backward compatible using the comment marker: - -.br - % -.B SiSU -0.38 +The command to create a sisupod is: .br -variations include ' -.B SiSU -(text|master|insert) [version]' and 'sisu\-[version]' + sisu \-S [filename] .br -.B 0.51 -(2007w13/6) skins changed (simplified), markup unchanged +Alternatively, make a pod of the contents of a whole directory: .br -.B 0.42 -(2006w27/4) * (asterisk) type endnotes, used e.g. in relation to author + sisu \-S .br .B SiSU -0.42 is the same as 0.38 with the introduction of some additional endnote -types, - -.br -Introduces some variations on endnotes, in particular the use of the asterisk - -.nf -~{* for example for describing an author }~ and ~{** for describing a second author }~ -.fi - -.br -* for example for describing an author +processing can be done directly against a sisupod; which may be located locally +or on a remote server for which a url is provided. .br -** for describing a second author + .br -and - -.nf -~[* \ my \ note \ ]~ or ~[+ \ another \ note \ ]~ -.fi + +.SH CONFIGURATION .br -which numerically increments an asterisk and plus respectively -.br -*1 my note +1 another note +.SH CONFIGURATION FILES -.br -.B 0.38 -(2006w15/7) introduced new/alternative notation for headers, e.g. @title: -(instead of 0~title), and accompanying document structure markup, -:A,:B,:C,1,2,3 (maps to previous 1,2,3,4,5,6) +.SH CONFIG.YML .br .B SiSU -0.38 introduced alternative experimental header and heading/structure markers, - -.nf -@headername: and headers :A~ :B~ :C~ 1~ 2~ 3~ -.fi - -.br -as the equivalent of: - -.nf -0~headername and headers 1~ 2~ 3~ 4~ 5~ 6~ -.fi +configration parameters are adjusted in the configuration file, which can be +used to override the defaults set. This includes such things as which directory +interim processing should be done in and where the generated output should be +placed. .br -The internal document markup of -.B SiSU -0.16 remains valid and standard Though note that +The .B SiSU -0.37 introduced a new file naming convention +configuration file is a yaml file, which means indentation is significant. .br .B SiSU -has in effect two sets of levels to be considered, using 0.38 notation A\-C -headings/levels, pre\-ordinary paragraphs /pre\-substantive text, and 1\-3 -headings/levels, levels which are followed by ordinary text. This may be -conceptualised as levels A,B,C, 1,2,3, and using such letter number notation, -in effect: A must exist, optional B and C may follow in sequence (not strict) 1 -must exist, optional 2 and 3 may follow in sequence i.e. there are two -independent heading level sequences A,B,C and 1,2,3 (using the 0.16 standard -notation 1,2,3 and 4,5,6) on the positive side: the 0.38 A,B,C,1,2,3 -alternative makes explicit an aspect of structuring documents in -.B SiSU -that is not otherwise obvious to the newcomer (though it appears more -complicated, is more in your face and likely to be understood fairly quickly); -the substantive text follows levels 1,2,3 and it is 'nice' to do most work in -those levels +resource configuration is determined by looking at the following files if they +exist: .br -.B 0.37 -(2006w09/7) introduced new file naming convention, \.sst (text), \.ssm -(master), \.ssi (insert), markup syntax unchanged + ./_sisu/v4/sisurc.yml .br -.B SiSU -0.37 introduced new file naming convention, using the file extensions \.sst - \.ssm and \.ssi to replace \.s1 \.s2 \.s3 \.r1 \.r2 \.r3 and \.si + ./_sisu/sisurc.yml .br -this is captured by the following file 'rename' instruction: - -.nf -rename 's/\e.s[123]$/\e.sst/' *.s{1,2,3} -rename 's/\e.r[123]$/\e.ssm/' *.r{1,2,3} -rename 's/\e.si$/\e.ssi/' *.si -.fi + ~/.sisu/v4/sisurc.yml .br -The internal document markup remains unchanged, from -.B SiSU -0.16 + ~/.sisu/sisurc.yml .br -.B 0.35 -(2005w52/3) sisupod, zipped content file introduced + /etc/sisu/v4/sisurc.yml .br -.B 0.23 -(2005w36/2) utf\-8 for markup file + /etc/sisu/sisurc.yml .br -.B 0.22 -(2005w35/3) image dimensions may be omitted if rmagick is available to be -relied upon +The search is in the order listed, and the first one found is used. .br -.B 0.20.4 -(2005w33/4) header 0~links +In the absence of instructions in any of these it falls back to the internal +program defaults. .br -.B 0.16 -(2005w25/2) substantial changes introduced to make markup cleaner, header -0~title type, and headings [1\-6]~ introduced, also percentage sign (%) at -start of a text line as comment marker +Configuration determines the output and processing directories and the database +access details. .br +If .B SiSU -0.16 (0.15 development branch) introduced the use of - -.br -the header 0~ and headings/structure 1~ 2~ 3~ 4~ 5~ 6~ - -.br -in place of the 0.1 header, heading/structure notation +is installed a sample sisurc.yml may be found in /etc/sisu/sisurc.yml -.br -.B SiSU -0.1 headers and headings structure represented by header 0{~ and -headings/structure 1{ 2{ 3{ 4{~ 5{ 6{ +.SH SISU_DOCUMENT_MAKE -.SH 12. SISU FILETYPES .br +Most sisu document headers relate to metadata, the exception is the @make: +header which provides processing related information. The default contents of +the @make header may be set by placing them in a file sisu_document_make. .br -.B SiSU -has plaintext and binary filetypes, and can process either type of document. - -.SH 12.1 \.SST \.SSM \.SSI MARKED UP PLAIN TEXT +The search order is as for resource configuration: .br -.B SiSU -documents are prepared as plain\-text (utf\-8) files with -.B SiSU -markup. They may make reference to and contain images (for example), which are -stored in the directory beneath them _sisu/image. -.B SiSU -plaintext markup files are of three types that may be distinguished by the file -extension used: regular text \.sst; master documents, composite documents that -incorporate other text, which can be any regular text or text insert; and -inserts the contents of which are like regular text except these are marked - \.ssi and are not processed. + ./_sisu/v4/sisu_document_make .br -.B SiSU -processing can be done directly against a sisu documents; which may be located -locally or on a remote server for which a url is provided. + ./_sisu/sisu_document_make .br -.B SiSU -source markup can be shared with the command: + ~/.sisu/v4/sisu_document_make .br - sisu \-s [filename] - -.SH 12.1.1 SISU TEXT \- REGULAR FILES (.SST) + ~/.sisu/sisu_document_make .br -The most common form of document in -.B SiSU, -see the section on -.B SiSU -markup. + /etc/sisu/v4/sisu_document_make .br - + /etc/sisu/sisu_document_make .br - - -.SH 12.1.2 SISU MASTER FILES (.SSM) +A sample sisu_document_make can be found in the _sisu/ directory under along +with the provided sisu markup samples. +.SH CSS \- CASCADING STYLE SHEETS (FOR HTML, XHTML AND XML) .br -Composite documents which incorporate other -.B SiSU -documents which may be either regular -.B SiSU -text \.sst which may be generated independently, or inserts prepared solely for -the purpose of being incorporated into one or more master documents. .br -The mechanism by which master files incorporate other documents is described as -one of the headings under under -.B SiSU -markup in the +CSS files to modify the appearance of .B SiSU -manual. - -.br -Note: Master documents may be prepared in a similar way to regular documents, -and processing will occur normally if a \.sst file is renamed \.ssm without -requiring any other documents; the \.ssm marker flags that the document may -contain other documents. - -.br -Note: a secondary file of the composite document is built prior to processing -with the same prefix and the suffix \._sst [^18] - -.br - - -.br - - -.SH 12.1.3 SISU INSERT FILES (.SSI) +html, +.I XHTML +or +.I XML +may be placed in the configuration directory: \./_sisu/css ; ~/.sisu/css or; +/etc/sisu/css and these will be copied to the output directories with the +command sisu \-CC. .br -Inserts are documents prepared solely for the purpose of being incorporated -into one or more master documents. They resemble regular -.B SiSU -text files except they are ignored by the -.B SiSU -processor. Making a file a \.ssi file is a quick and convenient way of flagging -that it is not intended that the file should be processed on its own. - -.SH 12.2 SISUPOD, ZIPPED BINARY CONTAINER (SISUPOD.ZIP, \.SSP) +The basic CSS file for html output is html. css, placing a file of that name in +directory _sisu/css or equivalent will result in the default file of that name +being overwritten. .br -A sisupod is a zipped -.B SiSU -text file or set of -.B SiSU -text files and any associated images that they contain (this will be extended -to include sound and multimedia\-files) +.I HTML: +html. css .br -.B SiSU -plaintext files rely on a recognised directory structure to find contents such -as images associated with documents, but all images for example for all -documents contained in a directory are located in the sub\-directory -_sisu/image. Without the ability to create a sisupod it can be inconvenient to -manually identify all other files associated with a document. A sisupod -automatically bundles all associated files with the document that is turned -into a pod. +.I XML +DOM: dom.css .br -The structure of the sisupod is such that it may for example contain a single -document and its associated images; a master document and its associated -documents and anything else; or the zipped contents of a whole directory of -prepared -.B SiSU -documents. +.I XML +SAX: sax.css .br -The command to create a sisupod is: +.I XHTML: +xhtml. css .br - sisu \-S [filename] +The default homepage may use homepage.css or html. css .br -Alternatively, make a pod of the contents of a whole directory: +Under consideration is to permit the placement of a CSS file with a different +name in directory _sisu/css directory or equivalent.[^20] +.SH ORGANISING CONTENT \- DIRECTORY STRUCTURE AND MAPPING .br - sisu \-S .br .B SiSU -processing can be done directly against a sisupod; which may be located locally -or on a remote server for which a url is provided. - -.br - - -.br - - -.SH 13. EXPERIMENTAL ALTERNATIVE INPUT REPRESENTATIONS -.br +v3 has new options for the source directory tree, and output directory +structures of which there are 3 alternatives. -.SH 13.1 ALTERNATIVE XML +.SH DOCUMENT SOURCE DIRECTORY .br -.B SiSU -offers alternative XML input representations of documents as a proof of -concept, experimental feature. They are however not strictly maintained, and -incomplete and should be handled with care. +The document source directory is the directory in which sisu processing +commands are given. It contains the sisu source files (.sst \.ssm \.ssi), or +(for sisu v3 may contain) subdirectories with language codes which contain the +sisu source files, so all English files would go in subdirectory en/, French in +fr/, Spanish in es/ and so on. ISO 639\-1 codes are used (as varied by po4a). A +list of available languages (and possible sub\-directory names) can be obtained +with the command "sisu \-\-help lang" The list of languages is limited to +langagues supported by XeTeX polyglosia. -.br -.B convert from sst to simple xml representations (sax, dom and node): +.SH GENERAL DIRECTORIES -.br - sisu \-\-to\-sax [filename/wildcard] or sisu \-\-to\-sxs [filename/wildcard] +.nf +./subject_name/ +% files stored at this level e.g. sisu_manual.sst or +% for sisu v3 may be under language sub\-directories +% e.g. + \./subject_name/en + \./subject_name/fr + \./subject_name/es + \./subject_name/_sisu + \./subject_name/_sisu/css + \./subject_name/_sisu/image +.fi -.br - sisu \-\-to\-dom [filename/wildcard] or sisu \-\-to\-sxd [filename/wildcard] +.SH DOCUMENT OUTPUT DIRECTORY STRUCTURES -.br - sisu \-\-to\-node [filename/wildcard] or sisu \-\-to\-sxn [filename/wildcard] +.SH OUTPUT DIRECTORY ROOT .br -.B convert to sst from any sisu xml representation (sax, dom and node): +The output directory root can be set in the sisurc.yml file. Under the root, +subdirectories are made for each directory in which a document set resides. If +you have a directory named poems or conventions, that directory will be created +under the output directory root and the output for all documents contained in +the directory of a particular name will be generated to subdirectories beneath +that directory (poem or conventions). A document will be placed in a +subdirectory of the same name as the document with the filetype identifier +stripped (.sst \.ssm) .br - sisu \-\-from\-xml2sst [filename/wildcard \ [.sxs.xml,.sxd.xml,sxn.xml]] +The last part of a directory path, representing the sub\-directory in which a +document set resides, is the directory name that will be used for the output +directory. This has implications for the organisation of document collections +as it could make sense to place documents of a particular subject, or type +within a directory identifying them. This grouping as suggested could be by +subject (sales_law, english_literature); or just as conveniently by some other +classification (X University). The mapping means it is also possible to place +in the same output directory documents that are for organisational purposes +kept separately, for example documents on a given subject of two different +institutions may be kept in two different directories of the same name, under a +directory named after each institution, and these would be output to the same +output directory. Skins could be associated with each institution on a +directory basis and resulting documents will take on the appropriate different +appearance. -.br -or the same: +.SH ALTERNATIVE OUTPUT STRUCTURES .br - sisu \-\-from\-sxml [filename/wildcard \ [.sxs.xml,.sxd.xml,sxn.xml]] - -.SH 13.1.1 XML SAX REPRESENTATION +There are 3 possibile output structures described as being, by language, by +filetype or by filename, the selection is made in sisurc.yml -.br -To convert from sst to simple xml (sax) representation: +.nf +#% output_dir_structure_by: language; filetype; or filename +output_dir_structure_by: language #(language & filetype, preferred?) +#output_dir_structure_by: filetype +#output_dir_structure_by: filename #(default, closest to original v1 & v2) +.fi -.br - sisu \-\-to\-sax [filename/wildcard] or sisu \-\-to\-sxs [filename/wildcard] +.SH BY LANGUAGE .br -To convert from any sisu xml representation back to sst +The by language directory structure places output files .br - sisu \-\-from\-xml2sst [filename/wildcard \ [.sxs.xml,.sxd.xml,sxn.xml]] +The by language directory structure separates output files by language code +(all files of a given language), and within the language directory by filetype. .br -or the same: +Its selection is configured in sisurc.yml .br - sisu \-\-from\-sxml [filename/wildcard \ [.sxs.xml,.sxd.xml,sxn.xml]] +output_dir_structure_by: language -.SH 13.1.2 XML DOM REPRESENTATION +.nf + |\-\- en + |\-\- epub + |\-\- hashes + |\-\- html + | |\-\- viral_spiral.david_bollier + | |\-\- manifest + | |\-\- qrcode + | |\-\- odt + | |\-\- pdf + | |\-\- sitemaps + | |\-\- txt + | |\-\- xhtml + | `\-\- xml + |\-\- po4a + | `\-\- live\-manual + | |\-\- po + | |\-\- fr + | `\-\- pot + `\-\- _sisu + |\-\- css + |\-\- image + |\-\- image_sys \-> \../../_sisu/image_sys + `\-\- xml + |\-\- rnc + |\-\- rng + `\-\- xsd +.fi .br -To convert from sst to simple xml (dom) representation: +#by: language subject_dir/en/manifest/filename.html -.br - sisu \-\-to\-dom [filename/wildcard] or sisu \-\-to\-sxd [filename/wildcard] +.SH BY FILETYPE .br -To convert from any sisu xml representation back to sst +The by filetype directory structure separates output files by filetype, all +html files in one directory pdfs in another and so on. Filenames are given a +language extension. .br - sisu \-\-from\-xml2sst [filename/wildcard \ [.sxs.xml,.sxd.xml,sxn.xml]] +Its selection is configured in sisurc.yml .br -or the same: - -.br - sisu \-\-from\-sxml [filename/wildcard \ [.sxs.xml,.sxd.xml,sxn.xml]] - -.SH 13.1.3 XML NODE REPRESENTATION - -.br -To convert from sst to simple xml (node) representation: - -.br - sisu \-\-to\-node [filename/wildcard] or sisu \-\-to\-sxn [filename/wildcard] - -.br -To convert from any sisu xml representation back to sst - -.br - sisu \-\-from\-xml2sst [filename/wildcard \ [.sxs.xml,.sxd.xml,sxn.xml]] - -.br -or the same: - -.br - sisu \-\-from\-sxml [filename/wildcard \ [.sxs.xml,.sxd.xml,sxn.xml]] - -.SH 14. CONFIGURATION -.br - -.SH 14.1 DETERMINING THE CURRENT CONFIGURATION - -.br -Information on the current configuration of -.B SiSU -should be available with the help command: - -.br - sisu \-v - -.br -which is an alias for: - -.br - sisu \-\-help env - -.br -Either of these should be executed from within a directory that contains sisu -markup source documents. - -.SH 14.2 CONFIGURATION FILES (CONFIG.YML) - -.br -.B SiSU -configration parameters are adjusted in the configuration file, which can be -used to override the defaults set. This includes such things as which directory -interim processing should be done in and where the generated output should be -placed. - -.br -The -.B SiSU -configuration file is a yaml file, which means indentation is significant. - -.br -.B SiSU -resource configuration is determined by looking at the following files if they -exist: - -.br - ./_sisu/sisurc.yml - -.br - ~/.sisu/sisurc.yml - -.br - /etc/sisu/sisurc.yml - -.br -The search is in the order listed, and the first one found is used. - -.br -In the absence of instructions in any of these it falls back to the internal -program defaults. - -.br -Configuration determines the output and processing directories and the database -access details. - -.br -If -.B SiSU -is installed a sample sisurc.yml may be found in /etc/sisu/sisurc.yml - -.SH 15. SKINS -.br - -.br -Skins modify the default appearance of document output on a document, -directory, or site wide basis. Skins are looked for in the following locations: - -.br - ./_sisu/skin - -.br - ~/.sisu/skin - -.br - /etc/sisu/skin - -.br -.B Within the skin directory -are the following the default sub\-directories for document skins: - -.br - ./skin/doc - -.br - ./skin/dir - -.br - ./skin/site - -.br -A skin is placed in the appropriate directory and the file named skin_[name].rb - -.br -The skin itself is a ruby file which modifies the default appearances set in -the program. - -.SH 15.1 DOCUMENT SKIN - -.br -Documents take on a document skin, if the header of the document specifies a -skin to be used. - -.nf -@skin: skin_united_nations -.fi - -.SH 15.2 DIRECTORY SKIN - -.br -A directory may be mapped on to a particular skin, so all documents within that -directory take on a particular appearance. If a skin exists in the skin/dir -with the same name as the document directory, it will automatically be used for -each of the documents in that directory, (except where a document specifies the -use of another skin, in the skin/doc directory). - -.br -A personal habit is to place all skins within the doc directory, and symbolic -links as needed from the site, or dir directories as required. - -.SH 15.3 SITE SKIN - -.br -A site skin, modifies the program default skin. - -.SH 15.4 SAMPLE SKINS - -.br -With -.B SiSU -installed sample skins may be found in: - -.br - /etc/sisu/skin/doc and - /usr/share/doc/sisu/markup\-samples/samples/_sisu/skin/doc - -.br -(or equivalent directory) and if sisu\-markup\-samples is installed also under: - -.br - /usr/share/doc/sisu/markup\-samples\-non\-free/samples/_sisu/skin/doc - -.br -Samples of list.yml and promo.yml (which are used to create the right column -list) may be found in: - -.br - /usr/share/doc/sisu/markup\-samples\-non\-free/samples/_sisu/skin/yml (or - equivalent directory) - -.SH 16. CSS \- CASCADING STYLE SHEETS (FOR HTML, XHTML AND XML) -.br - -.br -CSS files to modify the appearance of -.B SiSU -html, XHTML or XML may be placed in the configuration directory: \./_sisu/css; -~/.sisu/css or; /etc/sisu/css and these will be copied to the output -directories with the command sisu \-CC. - -.br -The basic CSS file for html output is html.css, placing a file of that name in -directory _sisu/css or equivalent will result in the default file of that name -being overwritten. - -.br -HTML: html.css - -.br -XML DOM: dom.css - -.br -XML SAX: sax.css - -.br -XHTML: xhtml.css - -.br -The default homepage may use homepage.css or html.css - -.br -Under consideration is to permit the placement of a CSS file with a different -name in directory _sisu/css directory or equivalent, and change the default CSS -file that is looked for in a skin.[^19] - -.SH 17. ORGANISING CONTENT \- DIRECTORY STRUCTURE AND MAPPING -.br - -.br -.B SiSU -v3 has new options for the source directory tree, and output directory -structures of which there are 3 alternatives. - -.SH 17.1 DOCUMENT SOURCE DIRECTORY - -.br -The document source directory is the directory in which sisu processing -commands are given. It contains the sisu source files (.sst \.ssm \.ssi), or -(for sisu v3 may contain) subdirectories with language codes which contain the -sisu source files, so all English files would go in subdirectory en/, French in -fr/, Spanish in es/ and so on. ISO 639\-1 codes are used (as varied by po4a). A -list of available languages (and possible sub\-directory names) can be obtained -with the command "sisu \-\-help lang" The list of languages is limited to -langagues supported by XeTeX polyglosia. - -.SH 17.1.1 GENERAL DIRECTORIES +output_dir_structure_by: filetype .nf -./subject_name/ -% files stored at this level e.g. sisu_manual.sst or -% for sisu v3 may be under language sub\-directories -% e.g. -./subject_name/en -./subject_name/fr -./subject_name/es -./subject_name/_sisu -% configuration file e.g. sisurc.yml -./subject_name/_sisu/skin -% skins in various skin directories doc, dir, site, yml -./subject_name/_sisu/css -./subject_name/_sisu/image + |\-\- epub + |\-\- hashes + |\-\- html + |\-\- viral_spiral.david_bollier + |\-\- manifest + |\-\- qrcode + |\-\- odt + |\-\- pdf + |\-\- po4a + |\-\- live\-manual + | |\-\- po + | |\-\- fr + | `\-\- pot + |\-\- _sisu + | |\-\- css + | |\-\- image + | |\-\- image_sys \-> \../../_sisu/image_sys + | `\-\- xml + | |\-\- rnc + | |\-\- rng + | `\-\- xsd + |\-\- sitemaps + |\-\- txt + |\-\- xhtml + `\-\- xml .fi -.SH 17.2 DOCUMENT OUTPUT DIRECTORY STRUCTURES - -.SH 17.2.1 OUTPUT DIRECTORY ROOT - -.br -The output directory root can be set in the sisurc.yml file. Under the root, -subdirectories are made for each directory in which a document set resides. If -you have a directory named poems or conventions, that directory will be created -under the output directory root and the output for all documents contained in -the directory of a particular name will be generated to subdirectories beneath -that directory (poem or conventions). A document will be placed in a -subdirectory of the same name as the document with the filetype identifier -stripped (.sst \.ssm) - -.br -The last part of a directory path, representing the sub\-directory in which a -document set resides, is the directory name that will be used for the output -directory. This has implications for the organisation of document collections -as it could make sense to place documents of a particular subject, or type -within a directory identifying them. This grouping as suggested could be by -subject (sales_law, english_literature); or just as conveniently by some other -classification (X University). The mapping means it is also possible to place -in the same output directory documents that are for organisational purposes -kept separately, for example documents on a given subject of two different -institutions may be kept in two different directories of the same name, under a -directory named after each institution, and these would be output to the same -output directory. Skins could be associated with each institution on a -directory basis and resulting documents will take on the appropriate different -appearance. - -.SH 17.2.2 ALTERNATIVE OUTPUT STRUCTURES - .br -There are 3 possibile output structures described as being, by language, by -filetype or by filename, the selection is made in sisurc.yml - -.nf -#% output_dir_structure_by: language; filetype; or filename -output_dir_structure_by: language #(language & filetype, preferred?) -#output_dir_structure_by: filetype -#output_dir_structure_by: filename #(default, closest to original v1 & v2) -.fi - -.SH 17.2.3 BY LANGUAGE +#by: filetype subject_dir/html/filename/manifest.en.html -.br -The by language directory structure places output files +.SH BY FILENAME .br -The by language directory structure separates output files by language code -(all files of a given language), and within the language directory by filetype. +The by filename directory structure places most output of a particular file +(the different filetypes) in a common directory. .br Its selection is configured in sisurc.yml .br -output_dir_structure_by: language - -.nf - |\-\- en - |\-\- epub - |\-\- hashes - |\-\- html - | |\-\- viral_spiral.david_bollier - | |\-\- manifest - | |\-\- qrcode - | |\-\- odt - | |\-\- pdf - | |\-\- sitemaps - | |\-\- txt - | |\-\- xhtml - | `\-\- xml - |\-\- po4a - | `\-\- live\-manual - | |\-\- po - | |\-\- fr - | `\-\- pot - `\-\- _sisu - |\-\- css - |\-\- image - |\-\- image_sys \-> \../../_sisu/image_sys - `\-\- xml - |\-\- rnc - |\-\- rng - `\-\- xsd -.fi - -.br -#by: language subject_dir/en/manifest/filename.html - -.SH 17.2.4 BY FILETYPE - -.br -The by filetype directory structure separates output files by filetype, all -html files in one directory pdfs in another and so on. Filenames are given a -language extension. - -.br -Its selection is configured in sisurc.yml - -.br -output_dir_structure_by: filetype - -.nf - |\-\- epub - |\-\- hashes - |\-\- html - |\-\- viral_spiral.david_bollier - |\-\- manifest - |\-\- qrcode - |\-\- odt - |\-\- pdf - |\-\- po4a - |\-\- live\-manual - | |\-\- po - | |\-\- fr - | `\-\- pot - |\-\- _sisu - | |\-\- css - | |\-\- image - | |\-\- image_sys \-> \../../_sisu/image_sys - | `\-\- xml - | |\-\- rnc - | |\-\- rng - | `\-\- xsd - |\-\- sitemaps - |\-\- txt - |\-\- xhtml - `\-\- xml -.fi - -.br -#by: filetype subject_dir/html/filename/manifest.en.html - -.SH 17.2.5 BY FILENAME - -.br -The by filename directory structure places most output of a particular file -(the different filetypes) in a common directory. - -.br -Its selection is configured in sisurc.yml - -.br -output_dir_structure_by: filename +output_dir_structure_by: filename .nf |\-\- epub @@ -3251,1235 +2856,648 @@ output_dir_structure_by: filename | `\-\- xsd |\-\- sitemaps |\-\- src - |\-\- pod - `\-\- viral_spiral.david_bollier -.fi - -.br -#by: filename subject_dir/filename/manifest.en.html - -.SH 17.2.6 REMOTE DIRECTORIES - -.nf -\./subject_name/ -% containing sub_directories named after the generated files from which they are made - \./subject_name/src -% contains shared source files text and binary e.g. sisu_manual.sst and sisu_manual.sst.zip - \./subject_name/_sisu -% configuration file e.g. sisurc.yml - \./subject_name/_sisu/skin -% skins in various skin directories doc, dir, site, yml - \./subject_name/_sisu/css - \./subject_name/_sisu/image -% images for documents contained in this directory - \./subject_name/_sisu/mm -.fi - -.SH 17.2.7 SISUPOD - -.nf -\./sisupod/ -% files stored at this level e.g. sisu_manual.sst - \./sisupod/_sisu -% configuration file e.g. sisurc.yml - \./sisupod/_sisu/skin -% skins in various skin directories doc, dir, site, yml - \./sisupod/_sisu/css - \./sisupod/_sisu/image -% images for documents contained in this directory - \./sisupod/_sisu/mm -.fi - -.SH 17.3 ORGANISING CONTENT - -.SH 18. HOMEPAGES -.br - -.br -.B SiSU -is about the ability to auto\-generate documents. Home pages are regarded as -custom built items, and are not created by -.B SiSU. -More accurately, -.B SiSU -has a default home page, which will not be appropriate for use with other -sites, and the means to provide your own home page instead in one of two ways -as part of a site's configuration, these being: - -.br -1. through placing your home page and other custom built documents in the -subdirectory _sisu/home/ (this probably being the easier and more convenient -option) - -.br -2. through providing what you want as the home page in a skin, - -.br -Document sets are contained in directories, usually organised by site or -subject. Each directory can/should have its own homepage. See the section on -directory structure and organisation of content. - -.SH 18.1 HOME PAGE AND OTHER CUSTOM BUILT PAGES IN A SUB\-DIRECTORY - -.br -Custom built pages, including the home page index.html may be placed within the -configuration directory _sisu/home/ in any of the locations that is searched -for the configuration directory, namely \./_sisu ; ~/_sisu ; /etc/sisu From -there they are copied to the root of the output directory with the command: - -.br - sisu \-CC - -.SH 18.2 HOME PAGE WITHIN A SKIN - -.br -Skins are described in a separate section, but basically are a file written in -the programming language -.B Ruby -that may be provided to change the defaults that are provided with sisu with -respect to individual documents, a directories contents or for a site. - -.br -If you wish to provide a homepage within a skin the skin should be in the -directory _sisu/skin/dir and have the name of the directory for which it is to -become the home page. Documents in the directory commercial_law would have the -homepage modified in skin_commercial law.rb; or the directory poems in -skin_poems.rb - -.nf - class Home - def homepage - # place the html content of your homepage here, this will become index.html - < - - -

this is my new homepage.

- - -HOME - end - end -.fi - -.SH 19. MARKUP AND OUTPUT EXAMPLES -.br - -.SH 19.1 MARKUP EXAMPLES - -.br -Current markup examples and document output samples are provided at - - -.br -For some documents hardly any markup at all is required at all, other than a -header, and an indication that the levels to be taken into account by the -program in generating its output are. - -.SH 20. SISU SEARCH \- INTRODUCTION -.br - -.br -.B SiSU -output can easily and conveniently be indexed by a number of standalone -indexing tools, such as Lucene, Hyperestraier. - -.br -Because the document structure of sites created is clearly defined, and the -text object citation system is available hypothetically at least, for all forms -of output, it is possible to search the sql database, and either read results -from that database, or just as simply map the results to the html output, which -has richer text markup. - -.br -In addition to this -.B SiSU -has the ability to populate a relational sql type database with documents at an -object level, with objects numbers that are shared across different output -types, which make them searchable with that degree of granularity. Basically, -your match criteria is met by these documents and at these locations within -each document, which can be viewed within the database directly or in various -output formats. - -.SH 21. SQL -.br - -.SH 21.1 POPULATING SQL TYPE DATABASES - -.br -.B SiSU -feeds sisu markupd documents into sql type databases PostgreSQL[^20] and/or -SQLite[^21] database together with information related to document structure. - -.br -This is one of the more interesting output forms, as all the structural data of -the documents are retained (though can be ignored by the user of the database -should they so choose). All site texts/documents are (currently) streamed to -four tables: - -.br - * one containing semantic (and other) headers, including, title, author, - subject, (the Dublin Core...); - -.br - * another the substantive texts by individual "paragraph" (or object) \- - along with structural information, each paragraph being identifiable by its - paragraph number (if it has one which almost all of them do), and the - substantive text of each paragraph quite naturally being searchable (both in - formatted and clean text versions for searching); and - -.br - * a third containing endnotes cross\-referenced back to the paragraph from - which they are referenced (both in formatted and clean text versions for - searching). - -.br - * a fourth table with a one to one relation with the headers table contains - full text versions of output, eg. pdf, html, xml, and ascii. - -.br -There is of course the possibility to add further structures. - -.br -At this level -.B SiSU -loads a relational database with documents chunked into objects, their smallest -logical structurally constituent parts, as text objects, with their object -citation number and all other structural information needed to construct the -document. Text is stored (at this text object level) with and without -elementary markup tagging, the stripped version being so as to facilitate ease -of searching. - -.br -Being able to search a relational database at an object level with the -.B SiSU -citation system is an effective way of locating content generated by -.B SiSU. -As individual text objects of a document stored (and indexed) together with -object numbers, and all versions of the document have the same numbering, -complex searches can be tailored to return just the locations of the search -results relevant for all available output formats, with live links to the -precise locations in the database or in html/xml documents; or, the structural -information provided makes it possible to search the full contents of the -database and have headings in which search content appears, or to search only -headings etc. (as the Dublin Core is incorporated it is easy to make use of -that as well). - -.SH 22. POSTGRESQL -.br - -.SH 22.1 NAME - -.br -.B SiSU -\- Structured information, Serialized Units \- a document publishing system, -postgresql dependency package - -.SH 22.2 DESCRIPTION - -.br -Information related to using postgresql with sisu (and related to the -sisu_postgresql dependency package, which is a dummy package to install -dependencies needed for -.B SiSU -to populate a postgresql database, this being part of -.B SiSU -\- man sisu). - -.SH 22.3 SYNOPSIS - -.br - sisu \-D [instruction] [filename/wildcard \ if \ required] - -.br - sisu \-D \-\-pg \-\-[instruction] [filename/wildcard \ if \ required] - -.SH 22.4 COMMANDS - -.br -Mappings to two databases are provided by default, postgresql and sqlite, the -same commands are used within sisu to construct and populate databases however -\-d (lowercase) denotes sqlite and \-D (uppercase) denotes postgresql, -alternatively \-\-sqlite or \-\-pgsql may be used - -.br -.B \-D or \-\-pgsql -may be used interchangeably. - -.SH 22.4.1 CREATE AND DESTROY DATABASE - -.TP -.B \-\-pgsql \-\-createall -initial step, creates required relations (tables, indexes) in existing -(postgresql) database (a database should be created manually and given the same -name as working directory, as requested) (rb.dbi) - -.TP -.B sisu \-D \-\-createdb -creates database where no database existed before - -.TP -.B sisu \-D \-\-create -creates database tables where no database tables existed before - -.TP -.B sisu \-D \-\-Dropall -destroys database (including all its content)! kills data and drops tables, -indexes and database associated with a given directory (and directories of the -same name). - -.TP -.B sisu \-D \-\-recreate -destroys existing database and builds a new empty database structure - -.SH 22.4.2 IMPORT AND REMOVE DOCUMENTS - -.TP -.B sisu \-D \-\-import \-v [filename/wildcard] -populates database with the contents of the file. Imports documents(s) -specified to a postgresql database (at an object level). - -.TP -.B sisu \-D \-\-update \-v [filename/wildcard] -updates file contents in database - -.TP -.B sisu \-D \-\-remove \-v [filename/wildcard] -removes specified document from postgresql database. - -.SH 23. SQLITE -.br - -.SH 23.1 NAME - -.br -.B SiSU -\- Structured information, Serialized Units \- a document publishing system. - -.SH 23.2 DESCRIPTION - -.br -Information related to using sqlite with sisu (and related to the sisu_sqlite -dependency package, which is a dummy package to install dependencies needed for -.B SiSU -to populate an sqlite database, this being part of -.B SiSU -\- man sisu). - -.SH 23.3 SYNOPSIS - -.br - sisu \-d [instruction] [filename/wildcard \ if \ required] - -.br - sisu \-d \-\-(sqlite|pg) \-\-[instruction] [filename/wildcard \ if \ - required] - -.SH 23.4 COMMANDS - -.br -Mappings to two databases are provided by default, postgresql and sqlite, the -same commands are used within sisu to construct and populate databases however -\-d (lowercase) denotes sqlite and \-D (uppercase) denotes postgresql, -alternatively \-\-sqlite or \-\-pgsql may be used - -.br -.B \-d or \-\-sqlite -may be used interchangeably. - -.SH 23.4.1 CREATE AND DESTROY DATABASE - -.TP -.B \-\-sqlite \-\-createall -initial step, creates required relations (tables, indexes) in existing (sqlite) -database (a database should be created manually and given the same name as -working directory, as requested) (rb.dbi) - -.TP -.B sisu \-d \-\-createdb -creates database where no database existed before - -.TP -.B sisu \-d \-\-create -creates database tables where no database tables existed before - -.TP -.B sisu \-d \-\-dropall -destroys database (including all its content)! kills data and drops tables, -indexes and database associated with a given directory (and directories of the -same name). - -.TP -.B sisu \-d \-\-recreate -destroys existing database and builds a new empty database structure - -.SH 23.4.2 IMPORT AND REMOVE DOCUMENTS - -.TP -.B sisu \-d \-\-import \-v [filename/wildcard] -populates database with the contents of the file. Imports documents(s) -specified to an sqlite database (at an object level). - -.TP -.B sisu \-d \-\-update \-v [filename/wildcard] -updates file contents in database - -.TP -.B sisu \-d \-\-remove \-v [filename/wildcard] -removes specified document from sqlite database. - -.SH 24. INTRODUCTION -.br - -.SH 24.1 SEARCH \- DATABASE FRONTEND SAMPLE, UTILISING DATABASE AND SISU FEATURES, -INCLUDING OBJECT CITATION NUMBERING (BACKEND CURRENTLY POSTGRESQL) - -.br -Sample search frontend [^22] A small database and -sample query front\-end (search from) that makes use of the citation system, -.I object citation numbering -to demonstrates functionality.[^23] - -.br -.B SiSU -can provide information on which documents are matched and at what locations -within each document the matches are found. These results are relevant across -all outputs using object citation numbering, which includes html, XML, EPUB, -LaTeX, PDF and indeed the SQL database. You can then refer to one of the other -outputs or in the SQL database expand the text within the matched objects -(paragraphs) in the documents matched. - -.br -Note you may set results either for documents matched and object number -locations within each matched document meeting the search criteria; or display -the names of the documents matched along with the objects (paragraphs) that -meet the search criteria.[^24] - -.TP -.B sisu \-F \-\-webserv\-webrick -builds a cgi web search frontend for the database created - -.br -The following is feedback on the setup on a machine provided by the help -command: - -.br - sisu \-\-help sql - -.nf -Postgresql - user: ralph - current db set: SiSU_sisu - port: 5432 - dbi connect: DBI:Pg:database=SiSU_sisu;port=5432 -sqlite - current db set: /home/ralph/sisu_www/sisu/sisu_sqlite.db - dbi connect DBI:SQLite:/home/ralph/sisu_www/sisu/sisu_sqlite.db -.fi - -.br -Note on databases built - -.br -By default, [unless \ otherwise \ specified] databases are built on a directory -basis, from collections of documents within that directory. The name of the -directory you choose to work from is used as the database name, i.e. if you are -working in a directory called /home/ralph/ebook the database SiSU_ebook is -used. [otherwise \ a \ manual \ mapping \ for \ the \ collection \ is \ -necessary] - -.SH 24.2 SEARCH FORM - -.TP -.B sisu \-F -generates a sample search form, which must be copied to the web\-server cgi -directory - -.TP -.B sisu \-F \-\-webserv\-webrick -generates a sample search form for use with the webrick server, which must be -copied to the web\-server cgi directory - -.TP -.B sisu \-Fv -as above, and provides some information on setting up hyperestraier - -.TP -.B sisu \-W -starts the webrick server which should be available wherever sisu is properly -installed - -.br -The generated search form must be copied manually to the webserver directory as -instructed - -.SH 25. SISU_WEBRICK -.br - -.SH 25.1 NAME - -.br -.B SiSU -\- Structured information, Serialized Units \- a document publishing system - -.SH 25.2 SYNOPSIS - -.br -sisu_webrick [port] - -.br -or - -.br -sisu \-W [port] - -.SH 25.3 DESCRIPTION - -.br -sisu_webrick is part of -.B SiSU -(man sisu) sisu_webrick starts -.B Ruby -' s Webrick web\-server and points it to the directories to which -.B SiSU -output is written, providing a list of these directories (assuming -.B SiSU -is in use and they exist). - -.br -The default port for sisu_webrick is set to 8081, this may be modified in the -yaml file: ~/.sisu/sisurc.yml a sample of which is provided as -/etc/sisu/sisurc.yml (or in the equivalent directory on your system). - -.SH 25.4 SUMMARY OF MAN PAGE - -.br -sisu_webrick, may be started on it's own with the command: sisu_webrick [port] -or using the sisu command with the \-W flag: sisu \-W [port] - -.br -where no port is given and settings are unchanged the default port is 8081 - -.SH 25.5 DOCUMENT PROCESSING COMMAND FLAGS - -.br -sisu \-W [port] starts -.B Ruby -Webrick web\-server, serving -.B SiSU -output directories, on the port provided, or if no port is provided and the -defaults have not been changed in ~/.sisu/sisurc.yaml then on port 8081 - -.SH 25.6 FURTHER INFORMATION - -.br -For more information on -.B SiSU -see: or - -.br -or man sisu - -.SH 25.7 AUTHOR - -.br -Ralph Amissah or - -.SH 25.8 SEE ALSO - -.br - sisu(1) - -.br - sisu_vim(7) - -.SH 26. REMOTE SOURCE DOCUMENTS -.br - -.br -.B SiSU -processing instructions can be run against remote source documents by providing -the url of the documents against which the processing instructions are to be -carried out. The remote -.B SiSU -documents can either be sisu marked up files in plaintext \.sst or \.ssm or; -zipped sisu files, sisupod.zip or filename.ssp - -.br -.B \.sst / \.ssm \- sisu text files - -.br -.B SiSU -can be run against source text files on a remote machine, provide the -processing instruction and the url. The source file and any associated parts -(such as images) will be downloaded and generated locally. - -.nf -sisu \-3 http://[provide \ url \ to \ valid \ \.sst \ or \ \.ssm \ file] -.fi - -.br -Any of the source documents in the sisu examples page can be used in this way, -see and use the url to the - \.sst for the desired document. - -.br -NOTE: to set up a remote machine to serve -.B SiSU -documents in this way, images should be in the directory relative to the -document source \../_sisu/image - -.br -.B sisupod \- zipped sisu files - -.br -A sisupod is the zipped content of a sisu marked up text or texts and any other -associated parts to the document such as images. - -.br -.B SiSU -can be run against a sisupod on a (local or) remote machine, provide the -processing instruction and the url, the sisupod will be downloaded and the -documents it contains generated locally. - -.nf -sisu \-3 http://[provide \ url \ to \ valid \ sisupod.zip \ or \ \.ssp \ file] -.fi - -.br -Any of the source documents in the sisu examples page can be used in this way, -see and use the url for the -desired document. - -.SH REMOTE DOCUMENT OUTPUT -.br - -.SH 27. REMOTE OUTPUT -.br - -.br -Once properly configured -.B SiSU -output can be automatically posted once generated to a designated remote -machine using either rsync, or scp. - -.br -In order to do this some ssh authentication agent and keychain or similar tool -will need to be configured. Once that is done the placement on a remote host -can be done seamlessly with the \-r (for scp) or \-R (for rsync) flag, which -may be used in conjunction with other processing flags, e.g. - -.nf -sisu \-3R sisu_remote.sst -.fi - -.SH 27.1 COMMANDS - -.TP -.B \-R [filename/wildcard] -copies sisu output files to remote host using rsync. This requires that -sisurc.yml has been provided with information on hostname and username, and -that you have your "keys" and ssh agent in place. Note the behavior of rsync -different if \-R is used with other flags from if used alone. Alone the rsync -\-\-delete parameter is sent, useful for cleaning the remote directory (when -\-R is used together with other flags, it is not). Also see \-r - -.TP -.B \-r [filename/wildcard] -copies sisu output files to remote host using scp. This requires that -sisurc.yml has been provided with information on hostname and username, and -that you have your "keys" and ssh agent in place. Also see \-R - -.SH 27.2 CONFIGURATION - -.br -[expand \ on \ the \ setting \ up \ of \ an \ ssh\-agent \ / \ keychain] - -.SH 28. REMOTE SERVERS -.br - -.br -As -.B SiSU -is generally operated using the command line, and works within a Unix type -environment, -.B SiSU -the program and all documents can just as easily be on a remote server, to -which you are logged on using a terminal, and commands and operations would be -pretty much the same as they would be on your local machine. - -.SH 29. QUICKSTART \- GETTING STARTED HOWTO -.br - -.SH 29.1 INSTALLATION - -.br -Installation is currently most straightforward and tested on the -.B Debian -platform, as there are packages for the installation of sisu and all -requirements for what it does. - -.SH 29.1.1 DEBIAN INSTALLATION - -.br -.B SiSU -is available directly from the -.B Debian -Sid and testing archives (and possibly Ubuntu), assuming your -/etc/apt/sources.list is set accordingly: - -.nf - aptitude update - aptitude install sisu\-complete -.fi - -.br -The following /etc/apt/sources.list setting permits the download of additional -markup samples: - -.nf - #/etc/apt/sources.list -.br - deb http://ftp.fi.debian.org/debian/ unstable main non\-free contrib -.br - deb\-src http://ftp.fi.debian.org/debian/ unstable main non\-free contrib -.br - -.fi - -.br -The aptitude commands become: - -.nf - aptitude update -.br - aptitude install sisu\-complete sisu\-markup\-samples -.fi - -.br -If there are newer versions of -.B SiSU -upstream of the -.B Debian -archives, they will be available by adding the following to your -/etc/apt/sources.list - -.nf -#/etc/apt/sources.list - deb http://www.jus.uio.no/sisu/archive unstable main non\-free - deb\-src http://www.jus.uio.no/sisu/archive unstable main non\-free -.fi - -.br -repeat the aptitude commands - -.nf - aptitude update - aptitude install sisu\-complete sisu\-markup\-samples -.fi - -.br -Note however that it is not necessary to install sisu\-complete if not all -components of sisu are to be used. Installing just the package sisu will -provide basic functionality. - -.SH 29.1.2 RPM INSTALLATION - -.br -RPMs are provided though untested, they are prepared by running alien against -the source package, and against the debs. - -.br -They may be downloaded from: - -.br - - -.br -as root type: + |\-\- pod + `\-\- viral_spiral.david_bollier +.fi .br - rpm \-i [rpm \ package \ name] +#by: filename subject_dir/filename/manifest.en.html -.SH 29.1.3 INSTALLATION FROM SOURCE +.SH REMOTE DIRECTORIES -.br -To install -.B SiSU -from source check information at: +.nf +./subject_name/ +% containing sub_directories named after the generated files from which they are made + \./subject_name/src +% contains shared source files text and binary e.g. sisu_manual.sst and sisu_manual.sst.zip + \./subject_name/_sisu +% configuration file e.g. sisurc.yml + \./subject_name/_sisu/skin +% skins in various skin directories doc, dir, site, yml + \./subject_name/_sisu/css + \./subject_name/_sisu/image +% images for documents contained in this directory + \./subject_name/_sisu/mm +.fi -.br - +.SH SISUPOD -.br -* download the source package +.nf +./sisupod/ +% files stored at this level e.g. sisu_manual.sst + \./sisupod/_sisu +% configuration file e.g. sisurc.yml + \./sisupod/_sisu/skin +% skins in various skin directories doc, dir, site, yml + \./sisupod/_sisu/css + \./sisupod/_sisu/image +% images for documents contained in this directory + \./sisupod/_sisu/mm +.fi -.br -* Unpack the source +.SH ORGANISING CONTENT +.SH HOMEPAGES .br -Two alternative modes of installation from source are provided, setup.rb (by -Minero Aoki) and a rant(by Stefan Lang) built install file, in either case: the -first steps are the same, download and unpack the source file: .br -For basic use .B SiSU -is only dependent on the programming language in which it is written -.B Ruby, -and +is about the ability to auto\-generate documents. Home pages are regarded as +custom built items, and are not created by +.B SiSU. +More accurately, .B SiSU -will be able to generate html, EPUB, various XMLs, including ODF (and will also -produce LaTeX). Dependencies required for further actions, though it relies on -the installation of additional dependencies which the source tarball does not -take care of, for things like using a database (postgresql or sqlite)[^25] or -converting LaTeX to pdf. +has a default home page, which will not be appropriate for use with other +sites, and the means to provide your own home page instead in one of two ways +as part of a site's configuration, these being: .br -.B setup.rb +1. through placing your home page and other custom built documents in the +subdirectory _sisu/home/ (this probably being the easier and more convenient +option) .br -This is a standard ruby installer, using setup.rb is a three step process. In -the root directory of the unpacked -.B SiSU -as root type: - -.nf - ruby setup.rb config - ruby setup.rb setup - #[and \ as \ root:] - ruby setup.rb install -.fi +2. through providing what you want as the home page in a skin, .br -further information on setup.rb is available from: +Document sets are contained in directories, usually organised by site or +subject. Each directory can/should have its own homepage. See the section on +directory structure and organisation of content. -.br - +.SH HOME PAGE AND OTHER CUSTOM BUILT PAGES IN A SUB\-DIRECTORY .br - +Custom built pages, including the home page index.html may be placed within the +configuration directory _sisu/home/ in any of the locations that is searched +for the configuration directory, namely \./_sisu ; ~/_sisu ; /etc/sisu From +there they are copied to the root of the output directory with the command: .br -.B "install" + sisu \-CC +.SH MARKUP AND OUTPUT EXAMPLES .br -The "install" file provided is an installer prepared using "rant". In the root -directory of the unpacked -.B SiSU -as root type: -.br - ruby install base +.SH MARKUP EXAMPLES .br -or for a more complete installation: +Current markup examples and document output samples are provided off + or and in the sisu +\-markup\-sample package available off .br - ruby install +For some documents hardly any markup at all is required at all, other than a +header, and an indication that the levels to be taken into account by the +program in generating its output are. -.br -or +.SH SISU MARKUP SAMPLES .br - ruby install base +A few additional sample books prepared as sisu markup samples, output formats +to be generated using +.B SiSU +are contained in a separate package sisu \-markup\-samples. sisu +\-markup\-samples contains books (prepared using sisu markup), that were +released by their authors various licenses mostly different Creative Commons +licences that do not permit inclusion in the +.B Debian +Project as they have requirements that do not meet the +.B Debian +Free Software Guidelines for various reasons, most commonly that they require +that the original substantive text remain unchanged, and sometimes that the +works be used only non\-commercially. .br -This makes use of Rant (by Stefan Lang) and the provided Rantfile. It has been -configured to do post installation setup setup configuration and generation of -first test file. Note however, that additional external package dependencies, -such as tetex\-extra are not taken care of for you. +.I Accelerando, +Charles Stross (2005) +accelerando.charles_stross.sst .br -Further information on "rant" is available from: +.I Alice's Adventures in Wonderland, +Lewis Carroll (1865) +alices_adventures_in_wonderland.lewis_carroll.sst .br - +.I CONTENT, +Cory Doctorow (2008) +content.cory_doctorow.sst .br - +.I Democratizing Innovation, +Eric von Hippel (2005) +democratizing_innovation.eric_von_hippel.sst .br -For a list of alternative actions you may type: +.I Down and Out in the Magic Kingdom, +Cory Doctorow (2003) +down_and_out_in_the_magic_kingdom.cory_doctorow.sst .br - ruby install help +.I For the Win, +Cory Doctorow (2010) +for_the_win.cory_doctorow.sst .br - ruby install \-T - -.SH 29.2 TESTING SISU, GENERATING OUTPUT +.I Free as in Freedom \- Richard Stallman's Crusade for Free Software, +Sam Williams (2002) +free_as_in_freedom.richard_stallman_crusade_for_free_software.sam_williams.sst .br -To check which version of sisu is installed: +.I Free as in Freedom 2.0 \- Richard Stallman and the Free Software Revolution, +Sam Williams (2002), Richard M. Stallman (2010) +free_as_in_freedom_2.richard_stallman_and_the_free_software_revolution.sam_williams.richard_stallman.sst .br -sisu \-v +.I Free Culture \- How Big Media Uses Technology and the Law to Lock Down +Culture and Control Creativity, +Lawrence Lessig (2004) +free_culture.lawrence_lessig.sst .br -Depending on your mode of installation one or a number of markup sample files -may be found either in the directory: +.I Free For All \- How Linux and the Free Software Movement Undercut the High +Tech Titans, +Peter Wayner (2002) +free_for_all.peter_wayner.sst .br -... +.I GNU GENERAL PUBLIC LICENSE v2, +Free Software Foundation (1991) +gpl2.fsf.sst .br -or +.I GNU GENERAL PUBLIC LICENSE v3, +Free Software Foundation (2007) +gpl3.fsf.sst .br -... +.I Gulliver's Travels, +Jonathan Swift (1726 / 1735) +gullivers_travels.jonathan_swift.sst .br -change directory to the appropriate one: +.I Little Brother, +Cory Doctorow (2008) +little_brother.cory_doctorow.sst .br -cd /usr/share/doc/sisu/markup\-samples/samples - -.SH 29.2.1 BASIC TEXT, PLAINTEXT, HTML, XML, ODF, EPUB +.I The Cathederal and the Bazaar, +Eric Raymond (2000) +the_cathedral_and_the_bazaar.eric_s_raymond.sst .br -Having moved to the directory that contains the markup samples (see -instructions above if necessary), choose a file and run sisu against it +.I The Public Domain \- Enclosing the Commons of the Mind, +James Boyle (2008) +the_public_domain.james_boyle.sst .br -sisu \-NhwoabxXyv free_as_in_freedom.rms_and_free_software.sam_williams.sst +.I The Wealth of Networks \- How Social Production Transforms Markets and +Freedom, +Yochai Benkler (2006) +the_wealth_of_networks.yochai_benkler.sst .br -this will generate html including a concordance file, opendocument text format, -plaintext, XHTML and various forms of XML, and OpenDocument text - -.SH 29.2.2 LATEX / PDF +.I Through the Looking Glass, +Lewis Carroll (1871) +through_the_looking_glass.lewis_carroll.sst .br -Assuming a LaTeX engine such as tetex or texlive is installed with the required -modules (done automatically on selection of sisu\-pdf in -.B Debian -) +.I Two Bits \- The Cultural Significance of Free Software, +Christopher Kelty (2008) +two_bits.christopher_kelty.sst .br -Having moved to the directory that contains the markup samples (see -instructions above if necessary), choose a file and run sisu against it +.I UN Contracts for International Sale of Goods, +UN (1980) +un_contracts_international_sale_of_goods_convention_1980.sst .br -sisu \-pv free_as_in_freedom.rms_and_free_software.sam_williams.sst +.I Viral Spiral, +David Bollier (2008) +viral_spiral.david_bollier.sst +.SH SISU SEARCH \- INTRODUCTION .br -sisu \-3 free_as_in_freedom.rms_and_free_software.sam_williams.sst .br -should generate most available output formats: html including a concordance -file, opendocument text format, plaintext, XHTML and various forms of XML, and -OpenDocument text and pdf - -.SH 29.2.3 RELATIONAL DATABASE \- POSTGRESQL, SQLITE +.B SiSU +output can easily and conveniently be indexed by a number of standalone +indexing tools, such as Lucene, Hyperestraier. .br -Relational databases need some setting up \- you must have permission to create -the database and write to it when you run sisu. +Because the document structure of sites created is clearly defined, and the +text +.I object citation system +is available hypothetically at least, for all forms of output, it is possible +to search the sql database, and either read results from that database, or just +as simply map the results to the html output, which has richer text markup. .br -Assuming you have the database installed and the requisite permissions +In addition to this +.B SiSU +has the ability to populate a relational sql type database with documents at an +object level, with objects numbers that are shared across different output +types, which make them searchable with that degree of granularity. Basically, +your match criteria is met by these documents and at these locations within +each document, which can be viewed within the database directly or in various +output formats. +.SH SQL .br -sisu \-\-sqlite \-\-recreate -.br -sisu \-\-sqlite \-v \-\-import -free_as_in_freedom.rms_and_free_software.sam_williams.sst +.SH POPULATING SQL TYPE DATABASES .br -sisu \-\-pgsql \-\-recreate +.B SiSU +feeds sisu markupd documents into sql type databases +.I PostgreSQL +[^21] and/or +.I SQLite +[^22] database together with information related to document structure. .br -sisu \-\-pgsql \-v \-\-import -free_as_in_freedom.rms_and_free_software.sam_williams.sst - -.SH 29.3 GETTING HELP - -.SH 29.3.1 THE MAN PAGES +This is one of the more interesting output forms, as all the structural data of +the documents are retained (though can be ignored by the user of the database +should they so choose). All site texts/documents are (currently) streamed to +four tables: .br -Type: + * one containing semantic (and other) headers, including, title, author, + subject, (the + .I Dublin Core. + ..); .br - man sisu + * another the substantive texts by individual "paragraph" (or object) \- + along with structural information, each paragraph being identifiable by its + paragraph number (if it has one which almost all of them do), and the + substantive text of each paragraph quite naturally being searchable (both in + formatted and clean text versions for searching); and .br -The man pages are also available online, though not always kept as up to date -as within the package itself: + * a third containing endnotes cross\-referenced back to the paragraph from + which they are referenced (both in formatted and clean text versions for + searching). .br -* sisu.1 [^26] + * a fourth table with a one to one relation with the headers table contains + full text versions of output, eg. pdf, html, xml, and + .I ascii. .br -* sisu.8 [^27] +There is of course the possibility to add further structures. .br -* man directory [^28] - -.SH 29.3.2 BUILT IN HELP +At this level +.B SiSU +loads a relational database with documents chunked into objects, their smallest +logical structurally constituent parts, as text objects, with their object +citation number and all other structural information needed to construct the +document. Text is stored (at this text object level) with and without +elementary markup tagging, the stripped version being so as to facilitate ease +of searching. .br -sisu \-\-help +Being able to search a relational database at an object level with the +.B SiSU +citation system is an effective way of locating content generated by +.B SiSU. +As individual text objects of a document stored (and indexed) together with +object numbers, and all versions of the document have the same numbering, +complex searches can be tailored to return just the locations of the search +results relevant for all available output formats, with live links to the +precise locations in the database or in html/xml documents; or, the structural +information provided makes it possible to search the full contents of the +database and have headings in which search content appears, or to search only +headings etc. (as the +.I Dublin Core +is incorporated it is easy to make use of that as well). +.SH POSTGRESQL .br -sisu \-\-help \-\-env -.br -sisu \-\-help \-\-commands +.SH NAME .br -sisu \-\-help \-\-markup +.B SiSU +\- Structured information, Serialized Units \- a document publishing system, +postgresql dependency package -.SH 29.3.3 THE HOME PAGE +.SH DESCRIPTION .br - +Information related to using postgresql with sisu (and related to the +sisu_postgresql dependency package, which is a dummy package to install +dependencies needed for +.B SiSU +to populate a postgresql database, this being part of +.B SiSU +\- man sisu) . -.br - +.SH SYNOPSIS .br - - -.SH 29.4 MARKUP SAMPLES + sisu \-D [instruction] [filename/wildcard \ if \ required] .br -A number of markup samples (along with output) are available off: + sisu \-D \-\-pg \-\-[instruction] [filename/wildcard \ if \ required] -.br - +.SH COMMANDS .br -Additional markup samples are packaged separately in the file: +Mappings to two databases are provided by default, postgresql and sqlite, the +same commands are used within sisu to construct and populate databases however +\-d (lowercase) denotes sqlite and \-D (uppercase) denotes postgresql, +alternatively \-\-sqlite or \-\-pgsql may be used .br -*** +.B \-D or \-\-pgsql +may be used interchangeably. -.br -On -.B Debian -they are available in non\-free[^29] to include them it is necessary to include -non\-free in your /etc/apt/source.list or obtain them from the sisu home site. +.SH CREATE AND DESTROY DATABASE -.SH 30. EDITOR FILES, SYNTAX HIGHLIGHTING -.br +.TP +.B \-\-pgsql \-\-createall +initial step, creates required relations (tables, indexes) in existing +(postgresql) database (a database should be created manually and given the same +name as working directory, as requested) (rb.dbi) -.br -The directory: +.TP +.B sisu \-D \-\-createdb +creates database where no database existed before -.br - ./data/sisu/v2/conf/editor\-syntax\-etc/ +.TP +.B sisu \-D \-\-create +creates database tables where no database tables existed before -.br - ./data/sisu/v3/conf/editor\-syntax\-etc/ +.TP +.B sisu \-D \-\-Dropall +destroys database (including all its content)! kills data and drops tables, +indexes and database associated with a given directory (and directories of the +same name). -.br - /usr/share/sisu/v2/conf/editor\-syntax\-etc +.TP +.B sisu \-D \-\-recreate +destroys existing database and builds a new empty database structure -.br - /usr/share/sisu/v3/conf/editor\-syntax\-etc +.SH IMPORT AND REMOVE DOCUMENTS -.br -contains rudimentary sisu syntax highlighting files for: +.TP +.B sisu \-D \-\-import \-v [filename/wildcard] +populates database with the contents of the file. Imports documents(s) +specified to a postgresql database (at an object level). -.br -* (g)vim +.TP +.B sisu \-D \-\-update \-v [filename/wildcard] +updates file contents in database -.br - package: sisu\-vim +.TP +.B sisu \-D \-\-remove \-v [filename/wildcard] +removes specified document from postgresql database. +.SH SQLITE .br -status: largely done -.br - there is a vim syntax highlighting and folds component +.SH NAME .br -* gedit +.B SiSU +\- Structured information, Serialized Units \- a document publishing system. -.br -* gobby +.SH DESCRIPTION .br - file: sisu.lang +Information related to using sqlite with sisu (and related to the sisu_sqlite +dependency package, which is a dummy package to install dependencies needed for +.B SiSU +to populate an sqlite database, this being part of +.B SiSU +\- man sisu) . -.br -place in: +.SH SYNOPSIS .br - /usr/share/gtksourceview\-1.0/language\-specs + sisu \-d [instruction] [filename/wildcard \ if \ required] .br -or + sisu \-d \-\-(sqlite|pg) \-\-[instruction] [filename/wildcard \ if \ + required] -.br - ~/.gnome2/gtksourceview\-1.0/language\-specs +.SH COMMANDS .br - status: very basic syntax highlighting +Mappings to two databases are provided by default, postgresql and sqlite, the +same commands are used within sisu to construct and populate databases however +\-d (lowercase) denotes sqlite and \-D (uppercase) denotes postgresql, +alternatively \-\-sqlite or \-\-pgsql may be used .br - comments: this editor features display line wrap and is used by Goby! +.B \-d or \-\-sqlite +may be used interchangeably. -.br -* nano +.SH CREATE AND DESTROY DATABASE -.br - file: nanorc +.TP +.B \-\-sqlite \-\-createall +initial step, creates required relations (tables, indexes) in existing (sqlite) +database (a database should be created manually and given the same name as +working directory, as requested) (rb.dbi) -.br -save as: +.TP +.B sisu \-d \-\-createdb +creates database where no database existed before -.br - ~/.nanorc +.TP +.B sisu \-d \-\-create +creates database tables where no database tables existed before -.br - status: basic syntax highlighting +.TP +.B sisu \-d \-\-dropall +destroys database (including all its content)! kills data and drops tables, +indexes and database associated with a given directory (and directories of the +same name). -.br - comments: assumes dark background; no display line\-wrap; does line breaks +.TP +.B sisu \-d \-\-recreate +destroys existing database and builds a new empty database structure -.br -* diakonos (an editor written in ruby) +.SH IMPORT AND REMOVE DOCUMENTS -.br -file: diakonos.conf +.TP +.B sisu \-d \-\-import \-v [filename/wildcard] +populates database with the contents of the file. Imports documents(s) +specified to an sqlite database (at an object level). -.br -save as: +.TP +.B sisu \-d \-\-update \-v [filename/wildcard] +updates file contents in database -.br - ~/.diakonos/diakonos.conf +.TP +.B sisu \-d \-\-remove \-v [filename/wildcard] +removes specified document from sqlite database. +.SH INTRODUCTION .br -includes: -.br - status: basic syntax highlighting +.SH SEARCH \- DATABASE FRONTEND SAMPLE, UTILISING DATABASE AND SISU FEATURES, +INCLUDING OBJECT CITATION NUMBERING (BACKEND CURRENTLY POSTGRESQL) .br -comments: assumes dark background; no display line\-wrap +Sample search frontend [^23] A small database and +sample query front\-end (search from) that makes use of the citation system, +.I object citation numbering +to demonstrates functionality.[^24] .br -* kate & kwrite +.B SiSU +can provide information on which documents are matched and at what locations +within each document the matches are found. These results are relevant across +all outputs using +.I object citation numbering, +which includes html, +.I XML, +.I EPUB, +.I LaTeX, +.I PDF +and indeed the +.I SQL +database. You can then refer to one of the other outputs or in the +.I SQL +database expand the text within the matched objects (paragraphs) in the +documents matched. .br - file: sisu.xml +Note you may set results either for documents matched and object number +locations within each matched document meeting the search criteria; or display +the names of the documents matched along with the objects (paragraphs) that +meet the search criteria.[^25] -.br - place in: +.TP +.B sisu \-F \-\-webserv\-webrick +builds a cgi web search frontend for the database created .br - /usr/share/apps/katepart/syntax +The following is feedback on the setup on a machine provided by the help +command: .br - or + sisu \-\-help sql -.br - ~/.kde/share/apps/katepart/syntax +.nf +Postgresql + user: ralph + current db set: SiSU_sisu + port: 5432 + dbi connect: DBI:Pg:database=SiSU_sisu;port=5432 +sqlite + current db set: /home/ralph/sisu_www/sisu/sisu_sqlite.db + dbi connect DBI:SQLite:/home/ralph/sisu_www/sisu/sisu_sqlite.db +.fi .br - [settings::configure \ kate::{highlighting,filetypes}] +Note on databases built .br - [tools::highlighting::{markup,scripts}:: \ .B \ SiSU \ ] +By default, [unless \ otherwise \ specified] databases are built on a directory +basis, from collections of documents within that directory. The name of the +directory you choose to work from is used as the database name, i.e. if you are +working in a directory called /home/ralph/ebook the database SiSU_ebook is +used. [otherwise \ a \ manual \ mapping \ for \ the \ collection \ is \ +necessary] -.br -* nedit +.SH SEARCH FORM -.br - file: sisu_nedit.pats +.TP +.B sisu \-F +generates a sample search form, which must be copied to the web\-server cgi +directory -.br - nedit \-import sisu_nedit.pats +.TP +.B sisu \-F \-\-webserv\-webrick +generates a sample search form for use with the webrick server, which must be +copied to the web\-server cgi directory -.br - status: a very clumsy first attempt [not \ really \ done] +.TP +.B sisu \-W +starts the webrick server which should be available wherever sisu is properly +installed .br - comments: this editor features display line wrap +The generated search form must be copied manually to the webserver directory as +instructed +.SH SISU_WEBRICK .br -* emacs -.br - files: sisu\-mode.el +.SH NAME .br - to file ~/.emacs add the following 2 lines: +.B SiSU +\- Structured information, Serialized Units \- a document publishing system -.br - (add\-to\-list 'load\-path - "/usr/share/sisu/v2/conf/editor\-syntax\-etc/emacs") +.SH SYNOPSIS .br - (require 'sisu\-mode.el) +sisu_webrick [port] .br - [not \ done \ / \ not \ yet \ included] +or .br -* vim & gvim +sisu \-W [port] -.br - files: +.SH DESCRIPTION .br - package is the most comprehensive sisu syntax highlighting and editor - environment provided to date (is for vim/ gvim, and is separate from the - contents of this directory) +sisu_webrick is part of +.B SiSU +(man sisu) sisu_webrick starts +.B Ruby +' s Webrick web\-server and points it to the directories to which +.B SiSU +output is written, providing a list of these directories (assuming +.B SiSU +is in use and they exist). .br - status: this includes: syntax highlighting; vim folds; some error checking +The default port for sisu_webrick is set to 8081, this may be modified in the +yaml file: ~/.sisu/sisurc.yml a sample of which is provided as +/etc/sisu/sisurc.yml (or in the equivalent directory on your system). -.br - comments: this editor features display line wrap +.SH SUMMARY OF MAN PAGE .br -NOTE: +sisu_webrick, may be started on it's own with the command: sisu_webrick [port] +or using the sisu command with the \-W flag: sisu \-W [port] .br -[ \ .B \ SiSU \ parses \ files \ with \ long \ lines \ or \ line \ breaks, \ -but, \ display \ linewrap \ (without \ line\-breaks) \ is \ a \ convenient \ -editor \ feature \ to \ have \ for \ sisu \ markup] +where no port is given and settings are unchanged the default port is 8081 -.SH 31. HOW DOES SISU WORK? -.br +.SH DOCUMENT PROCESSING COMMAND FLAGS .br +sisu \-W [port] starts +.B Ruby +Webrick web\-server, serving .B SiSU -markup is fairly minimalistic, it consists of: a (largely optional) document -header, made up of information about the document (such as when it was -published, who authored it, and granting what rights) and any processing -instructions; and markup within the substantive text of the document, which is -related to document structure and typeface. -.B SiSU -must be able to discern the structure of a document, (text headings and their -levels in relation to each other), either from information provided in the -document header or from markup within the text (or from a combination of both). -Processing is done against an abstraction of the document comprising of -information on the document's structure and its objects,[2] which the program -serializes (providing the object numbers) and which are assigned hash sum -values based on their content. This abstraction of information about document -structure, objects, (and hash sums), provides considerable flexibility in -representing documents different ways and for different purposes (e.g. search, -document layout, publishing, content certification, concordance etc.), and -makes it possible to take advantage of some of the strengths of established -ways of representing documents, (or indeed to create new ones). +output directories, on the port provided, or if no port is provided and the +defaults have not been changed in ~/.sisu/sisurc.yaml then on port 8081 -.SH 32. SUMMARY OF FEATURES +.SH SUMMARY OF FEATURES .br .br * sparse/minimal markup (clean utf\-8 source texts). Documents are prepared in -a single UTF\-8 file using a minimalistic mnemonic syntax. Typical literature, -documents like "War and Peace" require almost no markup, and most of the -headers are optional. +a single +.I UTF\-8 +file using a minimalistic mnemonic syntax. Typical literature, documents like +"War and Peace" require almost no markup, and most of the headers are optional. .br * markup is easily readable/parsable by the human eye, (basic markup is simpler -and more sparse than the most basic HTML), [this \ may \ also \ be \ converted -\ to \ XML \ representations \ of \ the \ same \ input/source \ document]. +and more sparse than the most basic +.I HTML +) , [this \ may \ also \ be \ converted \ to \ .I \ XML \ representations \ of +\ the \ same \ input/source \ document]. .br * markup defines document structure (this may be done once in a header @@ -4502,38 +3520,59 @@ different strengths of various standard formats for representing documents, amongst the output formats currently supported are: .br - * html \- both as a single scrollable text and a segmented document +* +.I HTML +\- both as a single scrollable text and a segmented document .br - * xhtml +* +.I XHTML .br - * epub +* +.I EPUB .br - * XML \- both in sax and dom style xml structures for further development as - required +* +.I XML +\- both in sax and dom style xml structures for further development as required .br - * ODF \- open document format, the iso standard for document storage +* +.I ODT +\- Open Document Format text, the iso standard for document storage .br - * LaTeX \- used to generate pdf +* +.I LaTeX +\- used to generate pdf .br - * pdf (via LaTeX) +* +.I PDF +(via +.I LaTeX +) .br - * sql \- population of an sql database, (at the same object level that is - used to cite text within a document) +* +.I SQL +\- population of an sql database ( +.I PostgreSQL +or +.I SQLite +) , (at the same object level that is used to cite text within a document) .br Also produces: concordance files; document content certificates (md5 or sha256 digests of headings, paragraphs, images etc.) and html manifests (and sitemaps of content). (b) takes advantage of the strengths implicit in these very -different output types, (e.g. PDFs produced using typesetting of LaTeX, +different output types, (e.g. PDFs produced using typesetting of +.I LaTeX, databases populated with documents at an individual object/paragraph level, -making possible granular search (and related possibilities)) +making possible +.I granular search +(and related possibilities)) .br * ensuring content can be cited in a meaningful way regardless of selected @@ -4544,17 +3583,21 @@ browsers and formats. sisu seeks to provide a common way of pinpoint the text within a document, (which can be utilized for citation and by search engines). The outputs share a common numbering system that is meaningful (to man and machine) across all digital outputs whether paper, screen, or database -oriented, (pdf, HTML, EPUB, xml, sqlite, postgresql), this numbering system can -be used to reference content. +oriented, (pdf, +.I HTML, +.I EPUB, +xml, sqlite, postgresql) , this numbering system can be used to reference +content. .br -* Granular search within documents. SQL databases are populated at an object -level (roughly headings, paragraphs, verse, tables) and become searchable with -that degree of granularity, the output information provides the -object/paragraph numbers which are relevant across all generated outputs; it is -also possible to look at just the matching paragraphs of the documents in the -database; [output \ indexing \ also \ work \ well \ with \ search \ indexing \ -tools \ like \ hyperestraier]. +* Granular search within documents. +.I SQL +databases are populated at an object level (roughly headings, paragraphs, +verse, tables) and become searchable with that degree of granularity, the +output information provides the object/paragraph numbers which are relevant +across all generated outputs; it is also possible to look at just the matching +paragraphs of the documents in the database; [output \ indexing \ also \ work \ +well \ with \ search \ indexing \ tools \ like \ hyperestraier]. .br * long term maintainability of document collections in a world of changing @@ -4565,8 +3608,9 @@ considerable degree of future\-proofing, output representations are sometime in future, without modification of existing prepared texts .br -* SQL search aside, documents are generated as required and static once -generated. +* +.I SQL +search aside, documents are generated as required and static once generated. .br * documents produced are static files, and may be batch processed, this needs @@ -4575,8 +3619,10 @@ to be done only once but may be repeated for various reasons as desired presentations/representations) .br -* document source (plaintext utf\-8) if shared on the net may be used as input -and processed locally to produce the different document outputs +* document source ( +.I plaintext +utf\-8) if shared on the net may be used as input and processed locally to +produce the different document outputs .br * document source may be bundled together (automatically) with associated @@ -4590,8 +3636,15 @@ may be processed locally to produce the desired document outputs .br * for basic document generation, the only software dependency is .B Ruby, -and a few standard Unix tools (this covers plaintext, HTML, EPUB, XML, ODF, -LaTeX). To use a database you of course need that, and to convert the LaTeX +and a few standard Unix tools (this covers +.I plaintext, +.I HTML, +.I EPUB, +.I XML, +.I ODF, +.I LaTeX +) . To use a database you of course need that, and to convert the +.I LaTeX generated to pdf, a latex processor like tetex or texlive. .br @@ -4615,8 +3668,8 @@ i.e. to be able to take advantage from this minimal preparation starting point of some of the strengths of rather different established ways of representing documents for different purposes, whether for search (relational database, or indexed flat files generated for that purpose whether of complete documents, or -say of files made up of objects), online viewing (e.g. html, xml, pdf), or -paper publication (e.g. pdf)... +say of files made up of objects), online viewing (e.g. html, xml, pdf) , or +paper publication (e.g. pdf) \... .br the solution arrived at is by extracting structural information about the @@ -4627,155 +3680,64 @@ present. For example objects could be saved individually and identified by their hashes, with an index of how the objects relate to each other to form a document. -.SH 33. HELP SOURCES -.br - -.SH 33.1 MAN PAGES - -.br - man sisu - -.br - man sisu\-concordance - -.br - man sisu\-epub - -.br - man sisu\-git - -.br - man sisu\-harvest - -.br - man sisu\-html - -.br - man sisu\-odf - -.br - man sisu\-pdf - -.br - man sisu\-pg - -.br - man sisu\-po - -.br - man sisu\-sqlite - -.br - man sisu\-txt - -.br - man 7 sisu_complete - -.br - man 7 sisu_pdf - -.br - man 7 sisu_postgresql - -.br - man 7 sisu_sqlite - -.br - man sisu_termsheet - -.br - man sisu_webrick - -.SH 33.2 SISU GENERATED OUTPUT \- LINKS TO HTML - -.br -Note -.B SiSU -documentation is prepared in -.B SiSU -and output is available in multiple formats including amongst others html, pdf, -odf and epub, which may be also be accessed via the html pages[^30] - -.SH 33.2.1 WWW.SISUDOC.ORG - -.br - - -.br - - -.SH 33.3 MAN2HTML - -.SH 33.3.1 LOCALLY INSTALLED - -.br -file:///usr/share/doc/sisu/html/sisu.1.html - -.br - file:///usr/share/doc/sisu/html/sisu.1.html - -.br - /usr/share/doc/sisu/html/sisu_pdf.7.html - -.br - /usr/share/doc/sisu/html/sisu_postgresql.7.html +.TP +.BI 1. +objects include: headings, paragraphs, verse, tables, images, but not +footnotes/endnotes which are numbered separately and tied to the object from +which they are referenced. .br - /usr/share/doc/sisu/html/sisu_sqlite.7.html +.TP +.BI 2. +i.e. the .br - /usr/share/doc/sisu/html/sisu_webrick.1.html - -.SH 33.3.2 WWW.JUS.UIO.NO/SISU +.I HTML, .br - +.I PDF, .br - +.I EPUB, .br - +.I ODT .br - +outputs are each built individually and optimised for that form of +presentation, rather than for example the html being a saved version of the +odf, or the pdf being a saved version of the html. .br - +.TP +.BI 3. +the different heading levels .br - +.TP +.BI 4. +units of text, primarily paragraphs and headings, also any tables, poems, +code-blocks .br - - .TP -.BI 1. -objects include: headings, paragraphs, verse, tables, images, but not -footnotes/endnotes which are numbered separately and tied to the object from -which they are referenced. +.BI 5. +An open standard format for e-books .br .TP -.BI 2. -i.e. the html, pdf, epub, odf outputs are each built individually and -optimised for that form of presentation, rather than for example the html being -a saved version of the odf, or the pdf being a saved version of the html. +.BI 6. +Open Document Format ( .br -.TP -.BI 3. -the different heading levels +.I ODF .br -.TP -.BI 4. -units of text, primarily paragraphs and headings, also any tables, poems, -code-blocks +) text .br .TP -.BI 5. +.BI 7. Specification submitted by Adobe to ISO to become a full open ISO specification @@ -4784,14 +3746,9 @@ specification .br .TP -.BI 6. +.BI 8. ISO standard ISO/IEC 26300:2006 -.br -.TP -.BI 7. -An open standard format for e-books - .br .TP .BI *1. @@ -4809,33 +3766,39 @@ square brackets .br .TP -.BI 8. +.BI 9. .br .TP -.BI 9. +.BI 10. .br .TP -.BI 10. +.BI 11. From sometime after SiSU 0.58 it should be possible to describe SiSU markup using SiSU, which though not an original design goal is useful. .br .TP -.BI 11. -files should be prepared using UTF-8 character encoding +.BI 12. +files should be prepared using + +.br +.I UTF-8 + +.br +character encoding .br .TP -.BI 12. +.BI 13. a footnote or endnote .br .TP -.BI 13. +.BI 14. self contained endnote marker & endnote in one .br @@ -4860,17 +3823,17 @@ editors notes, numbered asterisk footnote/endnote series .br .TP -.BI 14. +.BI 15. .br .TP -.BI 15. +.BI 16. .br .TP -.BI 17. +.BI 18. Table from the Wealth of Networks by Yochai Benkler .br @@ -4878,7 +3841,7 @@ Table from the Wealth of Networks by Yochai Benkler .br .TP -.BI 18. +.BI 19. \.ssc (for composite) is under consideration but \._sst makes clear that this is not a regular file to be worked on, and thus less likely that people will have "accidents", working on a \.ssc file that is overwritten by subsequent @@ -4887,35 +3850,38 @@ appropriate suffix to use. .br .TP -.BI 20. +.BI 21. .br + .br + .br .TP -.BI 21. +.BI 22. .br + .br .TP -.BI 22. +.BI 23. .br .TP -.BI 23. +.BI 24. (which could be extended further with current back-end). As regards scaling of the database, it is as scalable as the database (here Postgresql) and hardware allow. .br .TP -.BI 24. +.BI 25. of this feature when demonstrated to an IBM software innovations evaluator in 2004 he said to paraphrase: this could be of interest to us. We have large document management systems, you can search hundreds of thousands of documents @@ -4924,62 +3890,25 @@ way we can tell you without opening each document where within each your matches are found. .br -.TP -.BI 25. -There is nothing to stop MySQL support being added in future. - -.br -.TP -.BI 26. - - -.br -.TP -.BI 27. - -.br .TP -.BI 28. - - -.br -29. the -.B Debian -Free Software guidelines require that everything distributed within -.B Debian -can be changed \- and the documents are authors' works that while freely -distributable are not freely changeable. - -.br -30. named index.html or more extensively through sisu_manifest.html -.br - .SH SEE ALSO -.br -\fIsisu\fR(1), -.br -\fIsisu\-epub\fR(1), -.br -\fIsisu\-harvest\fR(1), -.br -\fIsisu\-html\fR(1), -.br -\fIsisu\-odf\fR(1), -.br -\fIsisu\-pdf\fR(1), -.br -\fIsisu\-pg\fR(1), -.br -\fIsisu\-sqlite\fR(1), -.br -\fIsisu\-txt\fR(1). -.br -\fIsisu_vim\fR(7) - + sisu(1), + sisu-epub(1), + sisu-harvest(1), + sisu-html(1), + sisu-odf(1), + sisu-pdf(1), + sisu-pg(1), + sisu-sqlite(1), + sisu-txt(1). + sisu_vim(7) +.TP .SH HOMEPAGE -.br -More information about \fBSiSU\fR can be found at <\fIhttp://www.sisudoc.org/\fR> or <\fIhttp://www.jus.uio.no/sisu/\fR>. - + More information about SiSU can be found at or +.TP +.SH SOURCE + +.TP .SH AUTHOR -\fBSiSU\fR is written by Ralph Amissah <\fIralph@amissah.com\fR>. + SiSU is written by Ralph Amissah -- cgit v1.2.3